{
{ DECK: CMH$SDP_FAILURE_DATA_DOC
{ PURPOSE:
{    The purpose of this statistic is to record the failure data captured
{    by the system when logging side door port status from a STORNET/ESM
{    memory device.
{
{ FREQUENCY:
{    When STORNET/ESM is initially defined and at NOS/VE top of hour
{    processing thereafter.
{
{ CONTENT:
{    The  descriptive-data portion of this statistic contains:
{
{    '<mainframe>.<iou>.<pp>.<ch>.<element>*<message>'
{
{      where <mainframe> is the identification of the mainframe in the
{        form $SYSTEM_mmmm_ssss.  Where 'mmmm' is the model number of
{        Central Processor zero (CP0), e.g. 0990, and 'ssss' is the
{        serial number of that processor, e.g. 0104.
{
{      where <iou> is the string 'IOUn' where n is 0 or 1.  This
{        identifies the IOU associated with the channel over which
{        the failure was reported.
{
{      where <pp> is the string 'PPn' or 'CPPn' where n is the PP number
{        (in decimal) of the PP which performed the I/O operation which
{        is being reported.
{
{      where <ch> is the string 'CHn' or 'CCHn' where n is the channel
{        number (in decimal) over which the I/O request was processed.
{
{      where <element> is the element_name assigned to the STORNET/ESM
{        memory device via the PCU command DEFINE_ELEMENT_DEFINITION.
{
{      where <message> is the textual representation of an analysis code.
{        The message text corresponds with the analysis code in counter 2
{        of the statistics counter field.
{
{
{    The counter-value portion of this statistic contains:
{
{     1.  Date/Time Stamp.
{
{     2.  Analysis Code.
{         Indicates completion status or the extent to which the CPU and
{         PPU were able to isolate a failure when it was detected.
{
{     3.  STORNET/ESM side door port path information.
{
{     4.  Error Log (bits 0 - 63).
{
{     5.  Error Log (bits 0 - 63).
{
{     6.  Error Log (bits 0 - 63).
{
{     7.  Error Log (bits 0 - 63).
{
{     8.  Error Log (bits 0 - 63).
{
{     9.  Error Log (bits 0 - 63).
{
{    10.  Error Log (bits 0 - 63).
{
{    11.  Error Log (bits 0 - 63).
{
{    12.  Error Log (bits 0 - 63).
{
{    13.  Error Log (bits 0 - 63).
{
{    14.  Error Log (bits 0 - 63).
{
{    15.  Error Log (bits 0 - 63).
{
{    16.  Error Log (bits 0 - 63).
{
{    17.  Error Log (bits 0 - 63).
{
{    18.  Error Log (bits 0 - 63).
{
{    19.  Error Log (bits 0 - 35).
{         Bits 36 - 63 = zero.
{
{    20.  Side Door Port Status (bits 16 - 63).
{         Bits 0 - 15 = zero.
{
{
{  The following failure messages correspond to the condition codes defined
{  in decks dfc$sdp_driver_error_codes and dfc$sdp_logging_error_codes.
{
{  The <message> recorded in the Engineering Log entry is that shown below
{  preceded by the character string "ERR=VP730ncccc, " where 'n' is 0 if
{  device is STORNET, 1 if ESM II; and where 'cccc' is the symptom code.
{
{    2 - SIDE DOOR PORT CHANNEL ACTIVE ERROR
{        The SDPD PP driver found the data channel ACTIVE when it was expected
{        to be INACTIVE.
{
{    3 - SIDE DOOR PORT NO INACTIVE TO FUNCTION
{        The data channel did not go INACTIVE after a function was issued from
{        the SDPD PP driver to the STORNET/ESM side door port.
{
{    4 - SIDE DOOR PORT LOST DATA ON INPUT
{        A data transfer from the STORNET/ESM side door port to the SDPD PP
{        driver terminated early.
{
{    5 - SIDE DOOR PORT CHANNEL PARITY ERROR
{        The SDPD PP driver detected a data channel parity error.
{
{    6 - SIDE DOOR PORT CHANNEL NOT EMPTY
{        The data channel stayed FULL after a data transfer from the SDPD PP
{        driver to the STORNET/ESM side door port.
{
{    7 - SIDE DOOR PORT CHANNEL LOCKWORD ERROR
{        The PP number in the Channel Lockword for the STORNET/ESM side door
{        port channel in the Channel Interlock Table is incorrect.
{
{    8 - RESERVED
{
{    9 - RESERVED
{
{   10 - RESERVED
{
{   11 - RESERVED
{
{   12 - RESERVED
{
{   13 - RESERVED
{
{   14 - RESERVED
{
{   15 - RESERVED
{
{   16 - RESERVED
{
{   17 - RESERVED
{
{   18 - RESERVED
{
{   19 - RESERVED
{
{   20 - SIDE DOOR PORT NO INITIALIZATION ERROR
{        No errors occurred during side door port logging initialization.
{
{   21 - SIDE DOOR PORT CHANNEL INCORRECT STATE
{        No defined STORNET/ESM side door port channel is found having a
{        channel status state of 'CMC$ON'.  Channel status state is either
{        'CMC$DOWN' or 'CMC$OFF'.
{
{   22 - SIDE DOOR PORT CHANNEL UNAVAILABLE
{        Side door port logging could not RESERVE the defined STORNET/ESM side
{        door port channel from NOS/VE.
{
{   23 - SIDE DOOR PORT PP UNAVAILABLE
{        Side door port logging could not RESERVE a PPU resource having access
{        to the defined STORNET/ESM side door port channel.
{
{   24 - SIDE DOOR PORT NO SDPD RESPONSE
{        Side door port logging did not receive a response from the SDPD driver
{        within the required 4 second interval and a timeout occurred.
{
