~"  CREATE_MESSAGE_MODULE CMM$ACTION_MESSAGES$US_ENGLISH
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CHANNEL_DISABLED

              NOS/VE Reconfiguration Message

 Status           : NOS/VE disabled an element, a mass storage channel.
 Disabled Element : ~P1

 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine if any volumes are
   unavailable as a result of this action.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CONTROLLER_DISABLED

             NOS/VE Reconfiguration Message

 Status             : NOS/VE disabled an element, a mass storage controller.
 Disabled Element   : ~P1
 Element Identifier : ~P2
 Serial Number      : ~P3

 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine if any volumes are
   unavailable as a result of this action.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=UNIT_DISABLED

             NOS/VE Reconfiguration Message

 Status             : NOS/VE disabled an element, a mass storage unit.
 Disabled Element   : ~P1
 Element Identifier : ~P2
 Serial Number      : ~P3
 Volume             : ~P4

 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine which mass
   storage classes are affected by this action.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=RECONFIGURE_CHANNEL

             NOS/VE Reconfiguration Message

 Status           : NOS/VE disabled an element, a mass storage channel.
 Disabled Element : ~P1
 Enabled Path(s)  : ~P2
                    ~P3
                    ~P4
                    ~P5

 ~P6
 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine if any volumes are
   unavailable as a result of the reconfiguration.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=RECONFIGURE_CONTROLLER

             NOS/VE Reconfiguration Message

 Status           : NOS/VE disabled an element, a mass storage controller.
 Disabled Element : ~P1
 Enabled Path(s)  : ~P2
                    ~P3
                    ~P4
                    ~P5

 ~P6
 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine if any volumes are
   unavailable as a result of the reconfiguration.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=RECONFIGURE_UNIT

             NOS/VE Reconfiguration Message

 Status              : NOS/VE disabled a connection between a mass storage
                       controller and a unit
 Disabled Connection : ~P1
 Disabled Path       : ~P2
 Enabled Path        : ~P3

 ~P4
 Please inform the Customer Engineer.
 Use the DISPLAY_ACTIVE_VOLUMES command to determine if any volumes are
   unavailable as a result of the reconfiguration.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CONTROLLER_OVERTEMP

             NOS/VE Element Status Message

 Status              : A mass storage controller has encountered an
                       OVER TEMPERATURE condition.
 Controller Element  : ~P1

 Please inform the Customer Engineer.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=DAS_DRIVE_HEAD_SHIFT_WARNING

             NOS/VE Element Status Message

 Status               : A probable head shift condition has been
                        detected on a DAS disk drive. Action should
                        be taken to correct this condition as soon
                        as possible.
 Element              : ~P1
 Element Identifier   : ~P2
 Recorded VSN         : ~P3
 Physical Unit Number : ~P4

 Please inform the Customer Engineer.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=SSD_BATTERY_ALERT

             NOS/VE Element Status Message

 Status               : A problem has been detected with an SSD
                        back-up battery pack. Action should be
                        taken to correct this condition as soon
                        as possible.
 Element              : ~P1
 Element Identifier   : ~P2
 Recorded VSN         : ~P3
 Physical Unit Number : ~P4
 Battery Condition    : ~P5
 Please inform the Customer Engineer.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=PARITY_PROTECTION_DISABLED

             NOS/VE Element Status Message

 Status               : Parity Protection for an element is disabled.
                        One physical unit in a parity device is not
                        operational.
 Element              : ~P1
 Element Identifier   : ~P2
 Recorded VSN         : ~P3
 Physical Unit Number : ~P4

 Please inform the Customer Engineer.
~"**
END_MESSAGE_MODULE CREATE_MODULE=YES
