~"CREATE_MESSAGE_MODULE PFM$CHACC_OUTPUT$US_ENGLISH
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=ADMINISTRATOR_NOTES
 Notes:

 1.  These cycles were busy and were left in the PARENT_CATALOG_RESTORED
     and/or the RESPF_MODIFICATION_MISMATCH damage condition.  A file backup
     operation running concurrently with CHANGE_CATALOG_CONTENTS caused the
     "cycle busy" condition.

 2.  An applicable exception policy is one that:

       - Includes at least one of the actions:  DELETE,
         ENABLE_MATCHING_IMAGE, or ENABLE_NONMATCHING_IMAGE.

       - Does not have criteria such as JOBS, JOB_CLASSES, or JOB_MODE
         either as individual criteria or as part of the LOGIN_USERS
         criterion.

       - Includes at least one reference to a permanent catalog or file
         if the FILES criteria is specified.  Policies applying only to
         temporary files are not considered applicable.

       - Has all of its criteria satisfied by the file in question.

 3.  These files were busy.  The mass storage image is marked for release
     or deletion but remains assigned until the file is no longer busy.
     Jobs currently using the file must first detach the file or terminate.
     If you choose, you may be able to terminate these jobs by installing an
     exception policy.

     For example, assume that the mass storage image was released for the
     file :AQUA.USER.FILE which was busy.  If you install the following
     exception policy using the MANAGE_EXCEPTION_POLICIES utility, you may
     be able to cause the termination of jobs that subsequently access the
     old mass storage image of the file:

          change_exception_policies files=:aqua.user.file ..
                volume_unavailable=exit

 4.  CHANGE_CATALOG_CONTENTS makes a copy of the installed exception
     condition policies and removes any policies that it does not consider
     applicable to its mission (see note 2 above).  The following policies
     were considered applicable:
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=ALL_REFERENCED
     At least one exception policy defines a requirement to scan all
     families in the system.  It is necessary to scan all families when a
     policy:

         1) Specifies FILES=ALL

         2) Specifies the MASS_STORAGE_CLASSES criterion but does not
            specify other criteria such as FAMILIES, SETS, or VOLUMES.

         3) Specifies a generic file reference, e.g. $USER.file, that
            implies a need to scan all families.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=APPLICABLE_EXCEPTION_POLICIES
  CHANGE_CATALOG_CONTENTS enforces exception condition policies as defined by
  the MANAGE_EXCEPTION_POLICIES utility.  Therefore, files in a
  MEDIA_MISSING, UNDEFINED_DATA, or VOLUME_UNAVAILABLE condition may be
  affected as follows:
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=BUSY_CYCLES_DELETED
  Total Deleted Pending Detach by another Job (3)~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=BUSY_CYCLES_RELEASED
  Total Released Pending Detach by another Job (3)~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=BUSY_DAMAGED_CYCLES
  Total Damaged Cycles Not Processed (1)~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CLEARED_CONDITION
  Cleared ~P1 Damage Condition~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CONDITIONS_CLEARED
  Total Damage Conditions Cleared                        ~H59: ~P1
    MEDIA_IMAGE_INCONSISTENT (Cycles processed)          ~H59: ~P2
    PARENT_CATALOG_RESTORED                              ~H59: ~P3
    RESPF_MODIFICATION_MISMATCH                          ~H59: ~P4
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=COUNTS_BY_CONDITION
        Cycles in a MEDIA_MISSING condition              ~H59: ~P1
        Cycles in an UNDEFINED_DATA condition            ~H59: ~P2
        Cycles in a VOLUME_UNAVAILABLE condition         ~H59: ~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CYCLE_BUSY_DAMAGE
  Busy Cycle - Damage Condition(s) Remain Set (1)~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CYCLE_BUSY_DELETE
    Busy Cycle - Delete Pending (3)~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CYCLE_BUSY_RELEASE
    Busy Cycle - Release Pending (3)~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=CYCLES_DELETED
    Total Cycles Deleted ~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=DELETE_OPTION
     At least one exception policy authorizes the deletion of a file which
     is affected by an exception condition.  A file is a candidate for
     deletion, if the file meets the criteria of the policy that authorizes
     the deletion and the file either -

         1) has not been duplicated by ARCHIVE/VE, or

         2) has been duplicated, was later modified, and the applicable
            exception policy does not also enable the release of the file's
            mass storage image.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=DELETED_CYCLE
  Deleted Cycle with ~P1~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=EMI_CYCLES_RELEASED
      Total Released due to ENABLE_MATCHING_IMAGE ~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=ENABLED_MATCHING_IMAGE
  Retrieval Enabled - ~P1~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=ENABLED_NONMATCHING_IMAGE
  Retrieval of Older Version Enabled - ~P1~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=ENI_CYCLES_RELEASED
      Total Released due to ENABLE_NONMATCHING_IMAGE ~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=HEADER_LINE
CHANGE_CATALOG_CONTENTS ~P1 for ~P2 ~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=LOGIN_USERS_APPLICABLE
     Because you are executing with the privilege of a ~P1 administrator, it
     is assumed that you are executing on behalf of all of your users.
     Therefore, the file owner's family/user name is used to satisfy the
     LOGIN_USERS criterion present in at least one installed policy.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=MODIFICATION_DATES_AND_TIMES
    Modification Date Time altered in previous cycle.     ~H59Old Modification Date Time: ~P1
                                                          ~H59New Modification Date Time: ~P2
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=NO_CHANGES
  No changes were made.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=OBJECT_ERROR
****ERROR**** The following catalog object was skipped due to an unexpected
              internal error.  Please refer to the job log for details.

    ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=OBJECT_WARNING
****WARNING**** The following catalog object was skipped due to the abnormal
                status ~P1:

    ~P2
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=OBJECTS_SCANNED
  Total Objects Scanned                                  ~H59: ~P1
    Families                                             ~H59: ~P2
    Master Catalogs                                      ~H59: ~P3
    Subcatalogs                                          ~H59: ~P4
    Files                                                ~H59: ~P5
    Cycles                                               ~H59: ~P6
    Maximum Catalog Nesting                              ~H59: ~P7
    Maximum Files per Catalog                            ~H59: ~P8
    Maximum Cycles per File                              ~H59: ~P9
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=PARAMETERS
CHANGE_CATALOG_CONTENTS Parameters

  CATALOG                  : ~P1
  DELETE_DAMAGE_CONDITIONS : (~P2)
  PERFORM_CHANGES          : ~P3
  RETRIEVE_FILES           : ~P4
  RETRIEVE_FILE_LIST       : ~P5
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=PATH_PART
                                                          ~H59~P2~P3
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=RELEASE_OPTION
     At least one exception policy authorizes the release of the mass
     storage image of a file that has been duplicated by ARCHIVE/VE.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=SET_DAMAGE_CONDITION
    The RESPF_MODIFICATION_MISMATCH damage condition is now set for the cycle.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=TOTAL_CYCLES_APPLICABLE
  Total Cycles Affected by an Applicable Policy (2)  ~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=TOTAL_CYCLES_RELEASED
    Total Cycles Released ~H59: ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=TOTALS
CHANGE_CATALOG_CONTENTS Totals
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=UNDEFINED_OBJECT
****WARNING**** ~P1 ~P2 referenced in installed exception policies
                 is not defined in the active NOS/VE configuration.
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=UNEXPECTED_ABNORMAL_STATUS
****ERROR**** A change was attempted for the following object but an
              unexpected abnormal status was returned. Please refer
              to the job log for details.

    ~P1
~"**
~"CREATE_PARAMETER_PROMPT_MESSAGE NAME=USER_NOTES
 Notes:

 1.  These cycles were busy and were left in the PARENT_CATALOG_RESTORED
     and/or the RESPF_MODIFICATION_MISMATCH damage condition.  A file backup
     operation running concurrently with CHANGE_CATALOG_CONTENTS caused the
     "cycle busy" condition.

 2.  An applicable exception policy is one that:

       - Includes at least one of the actions:  DELETE,
         ENABLE_MATCHING_IMAGE, or ENABLE_NONMATCHING_IMAGE.

       - Does not have criteria such as JOBS, JOB_CLASSES, or JOB_MODE.

       - Has all of its criteria satisfied by the file in question.

 3.  These files were busy.  The mass storage image is marked for release
     or deletion but remains assigned until the file is no longer busy.
     Jobs currently using the file must first detach the file or terminate.
~"**
END_MESSAGE_MODULE CREATE_MODULE=YES
