.DF

11/12/85
Rob Horning

.DE

This is a preliminary spec for a custom delay line.

All of the specs in the Rhombus data sheet are assumed with the following
exceptions and additions.

The delay is 22.5 ns plus or minus 2 ns.  This is specified to be within
these limits for the supply voltage range of 4.75 volts to 5.25 volts.

The parts will be specified and tested for falling edges. (If needed I can
supply a relaxed spec rising edges.)

The input will be on pin one of a 14 pin .3 inch wide dip (standard package).

The output will be pin 8.

Vcc will be pin 14.

Ground will be pin 7.
