-
-
-
0 ======================
I N T E R C H A N G E
======================
-
0 THE CONCURRENT COMPUTER CORPORATION USERS GROUP
-
-
-
-
-
0 =============
P R O G R A M
L I B R A R Y
C A T A L O G
R21-03
=============
-
- February
1992
1
0 TABLE OF CONTENTS
-
- 1.0 INTERCHANGE-THE CONCURRENT COMPUTER CORPORATION USERS GROUP...1-1
1.1 OBJECTIVES.............................................1-1
1.2 MEMBERSHIP.............................................1-1
1.2.1 Membership Qualifications..............................1-1
1.3 PROGRAM LIBRARY OPERATION..............................1-2
- 2.0 INTERCHANGE PROGRAM LIBRARY ABSTRACTS.........................2-1
- APPENDICES
0 Appendix 1 INTERCHANGE Library Program Order Form...............A-1
Appendix 2 INTERCHANGE Library Submission Form..................A-2
Appendix 3 INTERCHANGE Membership Application Form..............A-3
1
0 CHAPTER 1
INTERCHANGE - THE CONCURRENT COMPUTER CORPORATION USERS GROUP
- 1.1 OBJECTIVES
0 The objectives of INTERCHANGE, the Concurrent Computer Corporation
Users Group, a voluntary non-profit group are as follows:
0 Establish and maintain a vehicle to effectively facilitate the
exchange of information among the membership.
0 Provide guidance and support for Special Interest Groups and
Local INTERCHANGE Chapters.
0 Provide the membership the means to collectively communicate with
Concurrent Computer Corporation on current and future product
development and support.
0 Continued activities which are designed to help achieve these
objectives are:
0 National Newsletter
0 National User Program Library
0 Annual National Convention
0 Special Interest Group Meetings
0 Local Chapter Meetings and Local Interest Groups
0 Quarterly meetings between the INTERCHANGE Executive Committee
and Concurrent Computer Corporation representatives.
- 1.2 MEMBERSHIP
0 Membership in INTERCHANGE is voluntary. Members are invited to take
an active interest in INTERCHANGE by contributing to the program
library, the newsletter, and by participating in it's meetings and
seminars.
0 All members will receive the newsletter and program library catalog.
Other INTERCHANGE material is available on a request basis.
0 1.2.1 Membership Qualifications
0 An INTERCHANGE membership may be obtained by any company, firm,
organization or individual meeting one of the following criteria:
0 Currently owns a Concurrent Computer Corporation computer.
0 Has placed an order for a Concurrent Computer Corporation
computer.
0 Is an OEM using or incorporating Concurrent Computer Corporation
hardware or software into their products for resale.
-
INTERCHANGE PROGRAM LIBRARY 1-1
1
0 Provides hardware or software consulting services to users of
Concurrent Computer Corporation computers.
0 Is a supplier of Concurrent Computer Corporation compatible
hardware or software.
0 Membership requires the yearly payment of dues.
0 Membership application forms may be obtained by writing to
INTERCHANGE, 1 Technology Way, Westford MA 01886-9918. 508-392-2651
FAX-508-392-2368.
- 1.3 PROGRAM LIBRARY OPERATION
0 The INTERCHANGE Program Library contains programs contributed by
users.
0 Users are urged to submit programs which will be of value to others.
When submitting FORTRAN programs please also submit versions which
will compile using only the development compiler if you have such
versions available. When submitting programs in CAL Macro/32 please
do not forget to provide any user written macros which may reside in
site specific macro libraries. Any 'included' files called in during
compilation, expansion or assembly in any relevant language should be
provided. When other than Concurrent Computer Corporation standard
libraries are used they should be provided in source and library form.
In general, program submittals should include full source and, where
applicable, link command files and task image. Embedded link commands
using the DCMD command is a recommended alternative to link command
files. Where the option is available to you please provide task
images which will run on both the 32 and 3200 series machines. Please
remove any specific volume name dependencies from CSS's. Lets make it
easy for our members to use your program submittals.
0 Requests for programs must be submitted to INTERCHANGE in writing
using the request form in appendix 2 along with the appropriate fee.
-
-
-
-
-
-
-
-
1-2 INTERCHANGE PROGRAM LIBRARY
1
0 CHAPTER 2
INTERCHANGE PROGRAM LIBRARY ABSTRACTS
0 IUG0101: MEMFILE
Category: UTIL Language: CAL Macro/32 R-00 09/15/83
MEMFILE is an E-Task which makes use of SVC intercepts to create a
virtual device called MEM:. A user task may assign this 'device' and
through it read all of configured memory in either random or
sequential mode in 256 byte blocks, just as if memory were a read only
contiguous file. This program is particularly valuable in conjunction
with DMPTYP IUG0491 and DUMPRINT.
0 IUG0102: OS/32 ENHANCEMENTS
Category: OS&L Language: CAL Macro/32 R-10 02/12/92
This catalog entry has been opened to receive enhancements to the
operating system. Such enhancements can be those of general
usefulness or for a specific application, such as specialized drivers.
Currently this package contains enhancements to the BIOC driver. The
OS 6.2.4/7.2/8.1 BIOC enhancements include minimum write timeout
specification, control over type ahead buffer length, suppression of
rubout echo, a correction to DCB40, ability to send a line break,
sysgen clock specification which functions on dial-in lines, reset of
CMD2 byte to sysgen value upon disconnect, and several enhancements
required for smooth operation with the new intelligent modems.
0 An enhancement to BIOC is provided which gives the user an 8 line
history buffer. The user may retrieve any of the last 8 typed lines,
view it, then optionally execute it. Currently BIOC only allows you
to retrieve the single last line entered.
0 The panic dump module is enhanced with respect to generic discs.
0 BACKUP is changed to make CLOSE=REWIND the default.
0 CAL is enhanced by the addition of new pseudo-ops and start string
parms: PASS/NPASS causes CAL to output to the user's terminal the
message 'Ending pass nn' at the end of every pass. NLSTP[ char]/LSTP
causes CAL to suppress from the symbol table listing those symbols
which begin with the prefix 'char' whose default value is '@'.
LOUR/NLOUR causes CAL to list only unreferenced symbols. Two new
pseudo-ops, ALERT & ERROR, allow the user to force warnings (ALERT)
and errors (ERROR) permitting one to delay until assembly time certain
checks whose evaluation is not possible at macro time.
0 BIAS, EXAMINE and MODIFY from the OS console are greatly enhanced.
The EXAMINE display is enhanced to display both the absolute address
and the offset with respect to the bias. BIAS now has this new
compatible format:
BIAS N|+N|-N|*[TaskName][+N|-N]|null. If N bias is set to that
absolute value, If + or - N bias is offset from the current value by
that amount. If *[+N|-N] the bias is set to the start of the
currently 'tasked' task plus or minus the offset N. If the TaskName
is included it is automatically 'tasked' then the bias is set
accordingly. EXAMINE has this new compatible format:
EXAMINE AddressExpr[,N|/AddressExpr][,fd]. An AddressExpr is
N|+N|-N|^[+N|-N]|![+N|-N|]. N and +N indicate the display is to start
N bytes forward from the bias while -N begins the display N bytes
before the current bias. "^" is a variable whose value, initially 0
and always reset by the BIAS command, is the starting address with
- INTERCHANGE PROGRAM LIBRARY 2-1
1
0 respect to the bias of the last effective EXA command while "!" is a
variable whose value, initially 0 and always reset by the BIAS
command, is the address of the byte one greater than that displayed by
the last effective EXA command. MODIFY also sets "!" in this manner,
but does not set "^". MODIFY has this new compatable format:
MODIFY AddressExpr[,HalfwordData|null]*. "*" means one or more
repetitions. When a null parm is encountered the corresponding
halfword in memory is not altered. As a result of MODIFY setting "!"
but not "^" the following very convenient commands are possible:
EXA 1FEA,2;MOD ^,C830,8000;MOD !,4230,8076 followed by simply
EXA ^/! to view the results. An additional form of the MODIFY
command allows registers in the 'tasked' task to be modified:
MODIFY Rn[,FullwordData|null]*. Rn is the starting register where n
is in [0,F]. A null parm skips the corresponding register.
0 The changes and enhancements offered in this package are provided only
in source updater format, you must apply them youself against the
appropriate source modules.
0 A series of new console commands are implemented: XCANCEL - same as
cancel except no error is generated if task isn't present;
$IFTASK/$IFNTASK execute/skip commands if named task is loaded;
$IFWCS/$IFNWCS - execute/skip commands if processor supports WCS;
$IFOS/$IFNOS N.M - execute/skip commands if OS version is N.M. $QUERY
- Use like a $WRITE. The text string is written to the console with
an appended question mark to which a "yes" or "no" response is
required setting the EOT code to zero or nonzero.
0 IUG0103: CODECARD
Category: UTIL Language: CAL Macro/32 R-01 07/22/85
A program to generate a formatted ASCII code card and send it to a
device. Useful for testing the controller/device response to the
ASCII set.
0 IUG0104: OBJECT LIBRARY UTILITIES
Category: UTIL Language: CSS R-00 01/31/84
A package of 4 CSS files which greatly facilitate the creation and
maintenance of object libraries. These CSS's use the standard LIBLDR
to allow you to create, add modules to, replace modules in, and to
list the contents of such libraries with a single command.
0 IUG0105: XAIDS - OS DEBUGGING TOOL
Category: OS&L Language: CAL Macro/32 R-04 02/12/92
Contributed by CCUR as a useful, but unsupported, program, XAIDS is
intended only for the experienced systems programmer for use in
operating systems work. XAIDS is substituted for UBOT when generating
an OS. When so installed XAIDS takes control of the illegal
instruction trap and may be used to insert breakpoints, disassemble,
display register sets, etc. Users with their own specialized drivers
should find this a valuable diagnostic tool.
0 IUG0106: MACTOOLS - MACRO TOOL KIT
Category: OS&L Language: CAL Macro/32 R-09 08/11/89
Macros - with more to come - currently containing time/date processing
macros to pack/unpack date from halfword, date and time from fullword.
These are an implementation of algorithm 199 from the Collected
Algorithms of the A.C.M. The year 2000 looms large. If you store
time and date using these macros you won't be in any trouble until
Thursday April 8, 2100 at 06:25:15. Macros to control segmentation
- 2-2 INTERCHANGE PROGRAM LIBRARY
1
0 options. Macro to generate a uniformly distributed random integer.
Macros to do left and right justification of strings in a buffer. A
macro to find the first match of a pattern in a string, with the
option to ignore upper/lower case distinctions in [a..z,A..Z].
OSREV..generates a user stated symbol which is equated to the OS
revision level. OSUPDATE..analagous to OSREV for OS update level. A
macro to parse a start sting. Macros to translate ASCII to EBCDIC and
EBCDIC to ASCII. RAISE and its counterpart LOWER converts a buffer
from lowercase to uppercase and visa versa optionally padding with
spaces and clipping to 7 bit. CLIP7 clips to 7 bit and optionally
pads with spaces.
0 IUG0107: DEVICE HARDWARE STATUS LOOP PROGRAM
Category: UTIL Language: CAL Macro/32 R-00 04/06/84
Program will report changes in status in the DCB and the status in the
SSR command. Will also print a message if the device name is found in
a table in the program.
0 IUG0108: MAP - DISPLAY MEMORY FROM MTM TERMINAL
Category: UTIL Language: CAL Macro/32 R-04 02/12/92
Allows the privileged MTM user to display the system memory map to his
terminal providing much the same information as a D M command from the
OS console.
0 IUG0109: GLOBALLY ACT ON A SPECIFIED FILE DESCRIPTOR PATTERN
Category: UTIL Language: CAL Macro/32, FORTRAN R-01 08/01/86
Allows a user at an MTM terminal (or the system console) to construct
and execute a CSS command (GB) that applies to all files that match
the specified file pattern. For example, GB X-.-,DE &F.&E would
delete all files that begin with an X.
GB -.FTN,$IFNX &F.OBJ\COMPILE &F\$ENDC would compile all .FTN files
that did not have a corresponding .OBJ file. In the above, &F
substitutes for the filename, &E for the extension, other fields found
in the D F listing are similarly represented. The "\" acts as a line
separator, allowing multiple commands on a single line.
GB :-.-,$IF CH &V:&F.&E NE &V:GB.EXE\DEL &V:&F.&E\$ENDC would delete
all files in the users account on all accessible volumes. The
$IF CH...is needed to avoid trying to delete GB.EXE which contains the
constructed commands. For this command to work of course all the
users files to be deleted must be unprotected and unassigned.
0 IUG0110: SRCCOM - SMART TEXT FILE COMPARATOR
Category: UTIL Language: Pascal R-03 08/07/86
Defines match by user selectable number of contiguous equal records.
Can optionally ignore blanks, sequence numbers and FORTRAN style
comment lines. Upon detecting a mismatch it seeks ahead in each file
for a resumption of match. Maximum lookahead is limited only by
available memory.
0 IUG0111: FORTRAN/FILE UTILITY PACKAGE
Category: UTIL Language: FORTRAN R-01 01/28/90
COLM..Shifts part or whole lines within a file. COMPARE..Provides
line by line comparison of two files. COMTABLE..Sorts and tabulates
FORTRAN source file block or blank common blocks. Common is copied
throughout all desired subroutines. COMTABL2..Sorts and tabulates all
existing FORTRAN source file blocks or blank common blocks.
DOLOOP..Indents and/or realigns FORTRAN source files. GENINPUT..Used
to easily manipulate data files. LABEL..Adds or removes statement
labels to all executable statements in a FORTRAN program.
- INTERCHANGE PROGRAM LIBRARY 2-3
1
0 LISTF..Provides quick listings to console of files. NUMPR..Prints a
sequentially numbered copy of a file. PHOTO..Sets up a log file
monitoring console activity. RENUMBER..Renumbers statement labels in
a FORTRAN program.
0 IUG0112: NEW SOURCE UPDATER
Category: UTIL Language: FORTRAN R-00 06/06/84
An alternative to the CCUR source updater. Its a tad more friendly to
use. Revision numbers in the sequence field do not confuse it.
0 IUG0113: "FAIRLY WONDERFUL UTILITIES"
Category: UTIL Language: FORTRAN R-00 06/06/84
A collection of utilities, each of which alone may not appear to be
much, but together they are "fairly wonderful" according to the
author. MOVELEFT shifts a record a specified number of columns. CLIP
clips records before or after a specified pattern. PARAM adds
Integer*4 declarations for all untyped parameters in a FORTRAN
program. TOUPPER changes lower to upper case while TOLOWER does the
opposite. EXCEPT finds all lines in a file not containing a specified
pattern. FIND is the inverse of EXCEPT. DIR presents a sorted
directory listing qualified by a selection pattern. STRIP removes
comment lines in FORTRAN programs. APPEND appends one file to
another. APPLY inserts a string in a file. UNIQUE removes duplicate
lines. WRITETO appends a string to a file. MORE presents a file on
the screen 23 lines at a time. PRINTQUE is yet another printer queue
display program. CURSOR is a library of cursor control routines.
BSORT and QSORT are bubble and quick sort routines. STRING is a
library of string functions.
0 IUG0114: ALPHA3 - FORMATS BACKUP LISTING IN 3 COLUMNS
Category: UTIL Language: PASCAL & MACRO ASSEMBLER R-00 04/10/86
Processes the list output of BACKUP into a 3 column format sorted by
filename within account number.
0 IUG0115: NATIONAL BUREAU OF STANDARDS CORE MATHEMATICAL LIBRARY
Category: MATH Language: FORTRAN R-01 10/02/85
A collection of non-proprietary FORTRAN subprogram packages solving a
variety of mathematical and statistical problems. Although most
applications will only use a small number of CMLIB modules, there are
no name conflicts within the library and thus all of CMLIB can easily
be installed. All the documentation is machine readable.
0 IUG0116: SAN DIEGO ENVIRONMENT CONTROL MANAGER
Category: UTIL Language: CAL Macro/32 R-25 02/12/92
The Environment Control Manager (SDECM/32) provides facilities for
terminal users to transfer control of their terminals between local
monitor tasks as well as to access remote processor systems via
PENnet. Access is also provided to locally written monitor tasks.
Monitor tasks include Reliance and MTM. Transfer of control is
subject to the task being able to accept and interpret the 'ADD
terminal' command sent by SDECM/32. SDECM will control up to 126
terminal pairs (BIOC/ITAM) to provide easy transition between MTM and
Reliance. A functional variation supporting nonpaired lines will
support up to 253 terminals. A 'screen saver' feature clears the
screen of local terminals after 10 minutes of no use. A 'modem
disconnect' feature disconnects a phone line after 1 minute of no use.
These times are configurable. A 'I/O Count' feature tabulates the
number of I/O's on each terminal and sends an alert to the OS console
when a configurable threshold is exceeded. Disconnected terminal
- 2-4 INTERCHANGE PROGRAM LIBRARY
1
0 lines can ring and swamp the system with interupts consuming large
amounts of processor time. This warning will alert you to the source
of the problem.
0 IUG0117: KERMIT FILE TRANSFER PROTOCOL IMPLEMENTATION
Category: UTIL Language: FORTRAN R-05 02/23/90
KERMIT is a protocol for transferring sequential files between
computers of all sizes over ordinary asynchronous telecommunications
lines using packets, checksums and retransmission to promote data
integrity. The protocol was developed at Columbia University. This
is KERMIT-CO V2.2 12/20/89.
0 IUG0118: HANDY CSS'S
Category: UTIL Language: CSS R-03 08/01/86
Devoted to generally useful CSS's, currently including: HC..Hex
calculator. DC..Decimal calculator. HD..Hex to decimal conversion.
DH..Decimal to Hex conversion. ACCT..Displays private & group account
numbers, Date & Time, Device Name, Batch File Descriptor, User ID &
Last EOT code. BATCH..Submit a CSS as a batch job. A package of
systems development CSS's to do macro expansions, assemblies,
compiles, links in foreground and background are provided.
0 IUG0119: IRDR - SUBMIT CONSOLE COMMANDS FROM MTM TERMINAL
Category: UTIL Language: CAL/Macro32 R-01 08/04/87
This task creates a pseudo device to which a user task can assign and
write. The user's data buffer is passed to the OS command processor
via a SVC 2,14 to be executed as a command line. WARNING-Very useful
in restricted circumstances--Too dangerous to have available in the
typical multiuser environement as the average MTM user can do untoward
things to the system!
0 IUG0120: CAPTURE DEVICES
Category: UTIL Language: CAL/Macro32 R-00 11/19/84
Two programs, DEVASG which intercepts and performs all assigns, which
has been instructed by ASGDEV to accept all requests or only those
from a specified user. A user can, without being assigned to a given
device, deny other users access, until released by ASGDEV. A user
could for example prevent other users from corrupting his tape before
he could get it removed from the tape drive, or he could reserve the
plotter for himself.
0 IUG0121: ENABLE/DISABLE TYPAHEAD
Category: UTIL Language: CAL/Macro32 R-00 11/19/84
Disables/Enables typeahead on BIOC devices which are not assigned to
MTM or any other program.
0 IUG0122: TEXT/32 FORMAT TO VFC
Category: UTIL Language: FORTRAN R-04 01/21/87
Translates formatted output of TEXT/32 into VFC output. A VFC file
can be saved and printed later, and is considerably more compact than
a formatted file.
0 IUG0123: ARCHIVING SYSTEM
Category: UTIL Language: FORTRAN R-00 01/31/85
A system to aid in the archiving of user files. It is of particular
use to sites which have a large number of independent users. Users
can request a file be archived by a single command. The option to
delete the file from disc after archiving is available. The user is
informed at the time of the request of the tape number to which the
- INTERCHANGE PROGRAM LIBRARY 2-5
1
0 file will be archived. The actual archiving is performed at a later
date, according to a schedule established at the installation. The
operator can archive files on all volumes with a single command.
Audit logs are produced of all file archive requests and of all files
actually archived.
0 IUG0126: NBS LIBRARIAN
Category: UTIL Language: FORTRAN R-00 02/08/85
The NBS Librarian is a program for cross referencing object modules in
files. This cross referencing is by external reference/entry point
pairs. The Librarian scans files containing object modules and
produces a cross reference map and assigns a static link level to each
object module. Given a set of unique entry points defined in some
number of modules with no recursion, there exists a static link map
which is a directed tree. The static link level is the level in which
a module would be placed such that it is one lower than the lowest
module calling it.
0 IUG0127: SHOW TIME & PECALC
Category: UTIL Language: FORTRAN R-00 03/08/85
SHOW TIME continuously displays the time in full screen size letters.
Currently designed for Freedom 100 terminals, should be readily
adaptable for any terminal which allows cursor addressing. PECALC is
a terminal calculator operating in both decimal and hex. In addition
to conversions and simple arithmetic it also performs exponentiation,
logs, squares and trig functions.
0 IUG0128: COMPRESS - HIGH PERFORMANCE DATA COMPRESSION UTILITY
Category: UTIL Language: C R-01 04/27/85
This is the now-famous state-of-the-art public domain data compression
program "compress" which has been ported to OS/32 by its author. This
program uses a new technique called "modified Lempel-Ziv" to compress
files down to sizes that were never thought possible in a
data-independent algorithm. This program will help you alleviate the
ever-pressing problem of disk space. All previously developed text
compression programs are made obsolete by this program. In addition,
binary files are handled correctly. A program is included to perform
operations on multiple files based on a Display Files pattern.
0 IUG0129: DUPE - EASY TO USE TAPE DUPLICATOR
Category: UTIL Language: CAL R-00 04/15/85
A program which takes one tape as an input master and generates up to
4 copies of it simultaneously. The input tape is considered ended
when a double end of file marks is read. The double end of file mark
is written to the copies as well.
0 IUG0130: READCHEK - QUICK DISC SURFACE CHECK
Category: UTIL Language: CAL MACRO/32 R-03 05/23/90
Assigns SRO to the disc and reads the entire surface, reporting any
errors. If given enough space it will read entire cylinders.
Provides an informative report including tracks/cylinder,
sectors/track, total cylinders, total sectors, total megabytes,
transfer rate in megabytes/second, device code, device address,
controller address, selch address and device name. Executes very
quickly!
0 IUG0131: MAGCTRL - SEND COMMANDS TO TAPE DRIVE
Category: UTIL Language: CAL MACRO/32 R-00 04/15/85
Program to command a drive to back file, back record, forward file,
- 2-6 INTERCHANGE PROGRAM LIBRARY
1
0 write filemark, rewind, rewind and unload and select density. Very
convenient. When started without parms it explains its use.
0 IUG0132: DEVWAIT - COORDINATE DEVICE RESOURCES
Category: UTIL Language: CAL MACRO/32 R-00 04/15/85
A program which as its start string accepts a list of device names.
It attempts to assign each of these ERW. Those which are successfully
assigned remain assigned, those which cannot be assigned are tried
again after 10 seconds. This cycle repeats until all devices in the
list are assigned, at which point the program goes to EOT=0. Useful
in coordinating a process requiring specific device resources.
0 IUG0133: CARNIFEX - MTM SYSTEMS MANAGER'S UTILITY
Category: UTIL Language: CAL MACRO/32 R-01 01/29/86
A MTM Systems Manager's Utility which allows a privileged user by
account number specification to: allocate a file, rename (including
account transfer), reprotect, delete, display files by account number,
copy one file/device to another optionally deleting the source, list
a file with line numbering, print a file. A help screen explains its
use.
0 IUG0134: WAIT - WAIT FOR OPERATOR RESPONSE OR TIMEOUT
Category: UTIL Language: CAL MACRO/32 R-06 06/12/86
WAIT is designed to be inserted in a CSS stream as follows: LO WAIT
ST ,!Q[uiet],T[imeout]=seconds generating the message "Hit RETURN to
continue>". Entering the RETURN key causes WAIT to go to EOT code 0,
any other entry results in EOT code 2. Not responding results in a
timeout and EOT code 1. By testing the EOT code you may direct
further execution of the CSS. The !QUIET parm suppresses the sending
of a bell, i.e. control G, with the message. The TIMEOUT period may
be stated, but if not it defaults to 5 seconds. If started with ST ,
!H[elp] a description of the use of the program is displayed on the
user's screen. All possible error conditions are diagnosed. The time
remaining is displayed as it is counted down. Besides being a useful
program it is a thoroughly commented example of the use of task queue
traps, proceed I/O and timer completion queue entry.
0 IUG0135: SYPMAP - MAP SYSTEM SPACE USAGE
Category: UTIL Language: CAL MACRO/32 R-02 10/17/85
SYPMAP produces a map of system space, showing how each block of
memory is used. For each block the following data is given: The
owning task, the type of block, and starting and ending addresses of
the block, the size of the block in hex and decimal, additional
information if applicable, e.g. file control blocks, file descriptor,
program name.
0 IUG0136: CPUUSERS - PERIODICALLY DISPLAY CURRENTLY EXECUTING TASK
Category: UTIL Language: CAL MACRO/32 R-03 10/17/85
Every 0.2 seconds (adjustable) display the currently executing task,
load file, memory size, system space used, run priority and task
status.
0 IUG0137: MAGLOCK-DYNAMICALLY RESERVE TAPE RESOURCES BY ACCOUNT NUMBER
Category: UTIL Language: CAL MACRO/32 R-00 06/27/85
MAGLOCK prevents unauthorized use of a tape drive by requiring MOUNT
and DISMOUNT commands accompanied by an account number at the OS
console. This prevents inadvertent repositioning, or worse yet,
destruction of another users data during the time when the tape is on
the drive but not assigned to a specific task. A status command shows
- INTERCHANGE PROGRAM LIBRARY 2-7
1
0 the assignability status of all drives. MAGLOCK uses intercepts and
communications features of the OS.
0 IUG0138: DELECAND - SUGGEST DISC FILE CANDIDATES FOR DELETION
Category: UTIL Language: CAL MACRO/32 R-01 03/27/86
DELECAND suggests disc file candidates for deletion, producing a
report showing sectors used per file, in decreasing order. Files
using the most space are shown on the first page. If any files have
not been assigned for a year, a second report will list these.
0 IUG0140: TINFO - DISPLAY TASK AND LU INFORMATION FOR ANY TASK
Category: UTIL Language: CAL MACRO/32 R-04 11/27/90
TINFO allows an MTM user to display information on any task currently
loaded, including a status display of all assigned logical units.
General task information is first, including load file name, task and
system space memory usage, and priority. This is followed by a line
for each LU assigned, in a format resembling the DISPLAY LU command,
but with more data.
0 IUG0141: WAITUNTL - WAIT UNTIL A SPECIFIED TIME OF DAY
Category: UTIL Language: CAL MACRO/32 R-00 08/22/85
WAITUNTL accepts a time of day start parm in a user-friendly format,
converts it to a seconds-from-midnight value, and calls
SVC 2 code 10 to wait until that time is reached. An option is
provided to either wait or not if it is past the specified time.
0 IUG0142: ZAPVCF - SEND ABORT MESSAGE TO VCF UTILITY
Category: UTIL Language: CAL MACRO/32 R-00 10/17/85
ZAPVCF will recover the system console for command input if an
unrecoverable error occurs on a terminal attached to VCF (the Virtual
Console Facility). Such an error would prevent commands from being
entered to OS/32 anywhere, including commands to cancel VCF itself.
By running this program at an MTM terminal one can command VCF to
abort itself. Password protection will prevent unauthorized use of
this utility.
0 IUG0143: DDSTAT - DISPLAY DEVICE STATUS FOR ANY DEVICE
Category: UTIL Language: CAL MACRO/32 R-00 10/17/85
DDSTAT will continuously display the hardware status of any device in
the system, using the SSR instruction. The status byte and
descriptive messages will be logged to the user CRT 4 times per
second, allowing one to detect error, busy, and offline status
immediately as they occur. A start parm specifies the device, if
interactive both read and write side status are displayed.
0 IUG0144: DEVICE - A DEVICE INDEPENDENT GRAPHICS DRIVER
Category: UTIL Language: FORTRAN R-01 03/03/88
This set of programs is an interface to graphics devices which allows
one to write graphics primitives to several devices without regard to
the specific device. The salient features are the low overhead,
transportability, speed and expandability. In addition to the usual
primitives such as 'polygon', higher level functions such as 3D
contouring and surface plotting are available. Supported by this
release are Plot10 compatible devices, printers, Calcomp plotters and
the Lexidata 3400 & 8100 series. The next release will include the
IBM-PC, Hewlett Packard 7500 and the Lexidata 3700 series devices.
0 IUG0145: A FULL DUPLEX CRT DRIVER
Category: OS&L Language: CAL Macro/32 R-01 03/30/89
- 2-8 INTERCHANGE PROGRAM LIBRARY
1
0 A full duplex PALS/PASLA/COMM-MUX driver for use with CRT's and like
devices. Supporting ASCII, IMAGE or BINARY modes. Separate DCB's are
required for the read side (even address) and write side (read address
+1). Because it is a full duplex driver it allows you to post a
proceed read followed by a write without first halting the read. This
driver is incompatible with MTM. Lack of options is traded for full
duplex operation and less processor load.
0 IUG0146: LIST COBOL PROGRAMS WITH CROSS REFERENCING
Category: UTIL Language: COBOL R-00 01/29/86
This program provides a COBOL output listing with cross reference
numbers in the text lines. Reference line numbers of data names noted
in the source will appear in the space at the right hand side of the
text. Reference line number of procedure names noted in the source
will appear between the line number and the actual text.
0 IUG0147: ATFDECOD - PRODUCE DETAILED LISTING OF MTM ACTIVITIES
Category: UTIL Language: FORTRAN R-01 06/05/86
ATFDECOD decodes the MTM account transaction file. The amount of
information provided is extensive. It may be optionally limited to a
specified account.
0 IUG0148: LINKAT - A ROUTINE TO RETRIEVE A TASK'S LINK TIME
Category: UTIL Language: FORTRAN R-01 06/05/86
A FORTRAN subroutine to retrieve the date and time a task was linked.
Useful for configuration control.
0 IUG0149: TXCMDP/RXCMDP - SEND COMMANDS TO OS CONSOLE FROM MTM
Category: UTIL Language: FORTRAN R-01 06/05/86
A pair of programs which allow an MTM user to send commands to the OS
console for execution of operator commands. Based upon the internal
reader facility.
0 IUG0150: DEVINQ - WHICH TASKS ARE USING A GIVEN DEVICE?
Category: UTIL Language: CAL Macro/32 R-00 06/05/86
An E-Task which when given a device name returns the names of all
tasks using said device. Used to find out who has a tape drive
assigned, or why a disk cannot be marked off.
0 IUG0151: CONEX - CONSOLE EXCHANGE PROGRAM
Category: UTIL Language: CAL Macro/32 R-02 08/05/87
CONEX is a systems utility that allows any MTM terminal to become the
system console. It is useful to systems personnel, programmers or
anyone needing access to the system console. By swapping certain
identifying and control information between terminal DCB's, the MTM
terminal actually becomes the system console and the system console
becomes the user's MTM terminal. Another execution of the utility
restores the original state. The utility, which will only execute if
the user has E-task load privileges, is password protected against
unauthorized use.
0 IUG0152: DIR - DIRECTORY SEARCH FACILITY
Category: OS&L Language: CAL Macro/32 R-01 10/02/87
DIR is a relocatable E-task which creates a pseudo-device DIR:. A
user program, which does not require any special privileges, may
assign this pseudo-device and perform directory reads from any
existing disc volume. These requests may be 'wild card'
specifications, in the same format as the 'display files' command,
limited only by the user program account privileges.
- INTERCHANGE PROGRAM LIBRARY 2-9
1
0 Supplied with this package are two user programs which use the DIR
facility. A 'files' program which allows an MTM user with ACP display
files capability with account number specification, and a 'space'
program which reports the amount of disc space occupied by any 'wild
card' file specification on one or all volumes.
0 Besides being very useful in its own right, DIR is an excellent
example of the power of intercepts to extend the OS capabilities.
0 IUG0153: SPELL - A SPELLING UTILITY
Category: UTIL Language: CAL Macro/32 R-00 11/28/86
SPELL was written for people who 'occasionally' doubt their spelling
of a difficult word. I find it useful and you may too! To use SPELL
in response to the prompt "Enter your 'WORD' >...." you enter your
best guess, or alternatively your first suggested spelling may be
entered immediately thus: SPELL 'my-word'. The program responds with
a screen of 27 words with the closest in the center. If your word is
spelled correctly, it is highlighted. At this point you may enter a
new word or you may scan forward by entering a '+' or backward by
entering a '-'. The spelling dictionary contains 50,000 words. You
may edit it to add or delete words at will.
0 IUG0155: DSKSPACE - REPORT USED & FREE DISK SPACE
Category: UTIL Language: CAL Macro/32 R-00 05/24/87
Allows the privileged MTM user to obtain a report on disk space
availability by volume name.
0 IUG0156: SPY - UNIVERSAL SVC INTERCEPT PROGRAM
Category: UTIL Language: CAL Macro/32 R-00 05/24/87
A utility which allows the user to dynamically specify a task or
device on which SVC interception is to be performed. The user may set
the SVC type, the task or device to be intercepted, the intercept
mode, etc. A help screen is provided.
0 IUG0157: PANIC - INTERACTIVE PANIC DUMP ANALYZER
Category: UTIL Language: CAL Macro/32 R-00 05/24/87
A utility which allows the the experienced user to analyze panic
dumps.
0 IUG0158: DVRT - OS32 DRIVER TEST PROGRAM
Category: UTIL Language: CAL Macro/32 R-00 05/24/87
A utility which allows the experienced user to test drivers.
0 IUG0159: CSSSYNC - SYNCHRONIZE CSS WITH FOREGROUND TASKS
Category: UTIL Language: CAL Macro/32 R-01 02/12/92
An E-Task which can be used to synchronize the execution of a CSS with
end of task on one or more foreground tasks.
0 IUG0160: CALPOST - REPORT ASSEMBLY ERRORS TO USER TERMINAL
Category: UTIL Language: CAL Macro/32 R-01 07/14/89
A handy utility which post processes the CAL listing, reporting all
errors to the users terminal. No more searching 'F /** /1,1-'! Very
nice.
0 IUG0161: OS/32 AND UTILITY DEVELOPMENT CSS PROCEDURES
Category: UTIL Language: CAL Macro/32 R-01 07/14/89
A package which builds all the CSS's used in the assembly, compilation
and linkage of the OS/32 modules, drivers and utilities. Includes a
SNOBOL4 interpreter.
- 2-10 INTERCHANGE PROGRAM LIBRARY
1
0 IUG0162: MTM/RELIANCE INTERFACE BRIDGE
Category: UTIL Language: CAL Macro/32 R-00 05/28/87
This package provides a means to move between MTM and local or remote
Reliance systems. Requires revision 8.2 of MTM.
0 IUG0163: REGTRACK - MONITOR EXECUTION ADDRESS AND REGISTER CONTENTS
Category: UTIL Language: CAL Macro/32 R-00 05/28/87
A program which periodically reports the execution address and
register contents. This program requires a separate precision
interval clock. The interval is typically set to a very small value,
perhaps 8 microseconds between samples. This utility is used to track
down really nasty problems.
0 IUG0164: WATCH9 - MONITOR A MEMORY LOCATION AND CRASH IF MODIFIED
Category: UTIL Language: CAL Macro/32 R-00 05/28/87
A program which from an APU continuously monitors a memory location.
If any change in its contents occurs the system is immediately
crashed. Hopefully a study of the subsequent panic dump will permit
you to determine the responsible party.
0 IUG0165: MICRO EMACS - A FULL SCREEN EDITOR
Category: UTIL Language: C R-03 05/01/89
An implementation of microEmacs, somewhat less than the full EMACS,
yet very impressive. In particular it allows you to edit 2 or more
files at the same time. Wonderful for simultaneously displaying your
assembler/compiler listing and your source code for correction.
Includes a terminal capability description file into which you may
edit a description of your particular terminal, permitting microEmacs
to correctly use its features.
0 IUG0166: PROFF - A TEXT FORMATTER
Category: UTIL Language: C R-00 07/11/87
PROFF is a text formatter based on the format utility presented in
Software Tools. In addition to the minimum expected features of a
formatter, PROFF supports Roman numeral page numbering, table of
contents generation, macros, variables, output of special escape
sequences to configure printers and more.
0 IUG0167: NJIT PASCAL COMPILER/INTERPRETER/CODE GENERATOR V5.91
Category: OS&L Language: Pascal & CAL Macro/32 R-00 07/11/87
New Jersey Institute of Technology (NJIT) Pascal is a compiler for
standard Pascal as defined by Jensen & Wirth in the "Pascal Users
Manual and Report", Springer-Verlag, New York, 1975. It offers two
methods of compilation, one that generates reasonably efficient series
32 machine code, and the other which creates P-code for an interpreter
which provides a good debugging environment and fast compilation
times.
0 IUG0168: SWEEP - V2.27
Category: UTIL Language: Ratfor R-01 01/27/90
SWEEP is a utility running under OS/32 that provides an interactive
environment for the routine house-keeping tasks associated with
maintaining disk files. The following features are provided: 1..A
sorted list of the user's files is created that allows files to be
worked with individually and in groups. 2..An individual file or a
group of files can be copied, deleted, or printed. 3..Individual
files can be viewed at the terminal 20 lines at a time. 4..Groups of
files can be formed by moving through the list and tagging the ones to
be included or by using a single command to tag all files having a
- INTERCHANGE PROGRAM LIBRARY 2-11
1
0 particular character string in their directory entry. 5..The files
can be ordered by name, extension, or date last written in either
ascending or descending order. 6..A directory listing sorted in any
of the above ways can be sent to the user's terminal, a printer, or a
file. The directory listing can include the complete directory
information as supplied by MTM's Display Files command or an
abbreviated discription with filenames listed in 1, 2, or 3 columns.
7..An inventory of files can be generated which lists the disk space
taken by all files over a specific number of bytes choosen by the
user, files grouped by file name extension, files grouped by age in
days. 8..The disk space taken by files is available.
0 IUG0169: OSFILE - OS/32 FILE UTILITY
Category: UTIL Language: CAL Macro/32 R-00 08/05/87
The OS/32 File Utility (OSFILE) performs three functions: delete,
reprotect or rename. Single- or multiple-filename requests may be
entered, in the same format as the operator "DISPLAY FILES" command.
Requests can be limited by number of records or by date (either
created, last written or last assigned). If specified, non-zero
read/write protection keys can be ignored. In addition, a "list only"
function is available, whereby the current utility function will not
be performed on matching filenames.
0 IUG0170: PROG
Category: UTIL Language: CAL Macro/32 R-00 08/05/87
PROG will tell you the file name of the task which is running under
the name which is entered in the START command.
0 IUG0171: VOLUME DESCRIPTOR REBUILD
Category: UTIL Language: Pascal R-00 08/05/87
In many cases when a problem occurs with a disc volume that has been
damaged, it is only the integrity of the data in the volume descriptor
that has been lost. The volume descriptor contains pointers to the
disc structures that are necessary to read files on the disc.
Fortunately there is usually enough redundant information on the disc
to reconstruct the volume descriptor but the effort required to do so
manually can be prohibitive. The process of reconstructing the volume
descriptor is mechanical enough that this task can be performed
automatically.
0 IUG0172: LISTAUF - LIST INFORMATION FROM THE MTM AUF FILE
Category: UTIL Language: FORTRAN R-00 08/05/87
The LISTAUF program will list file information from the MTM authorized
user file to a user specified file or device. The following
information from the AUF is displayed: account #, group account #,
ascii-password, userid, password mnemonic representation (if
non-printable char(s) ).
0 IUG0174: LISTINP - LIST LAST INPUT LINE FROM BIOC TERMINALS
Category: UTIL Language: CAL MACRO/32 R-00 10/23/87
LISTINP displays the last input line read from all BIOC terminals in
the system. It makes use of a special buffer used by the BIOC
control-C function.
0 IUG0175: ERRSTAT - CHECK STATUS OF ERROR RECORDING FILE
Category: UTIL Language: CAL MACRO/32 R-00 10/23/87
ERRSTAT examines the system error recording file and displays the
number of records in use and the total number of records. Used
-
2-12 INTERCHANGE PROGRAM LIBRARY
1
0 periodically, it will provide more warning than the OS about a pending
wraparound condition on the error recording file.
0 IUG0176: TEXT MANIPULATION UTILITIES
Category: UTIL Language: CAL MACRO/32 R-00 03/02/88
SHIFT shifts the contents of a file right or left by a specified
amount within a window replacing the vacated positions with a
specified byte. ROTATE rotates the contents of a file right or left
by a specified amount within a window. LEFTJUST left justifies a
specified window in a file. RITEJUST right justifies a specified
window in a file. CRYPT encrypts and decrypts a file to keep its
contents secret. ATOE translates a file from ASCII to EBCDIC, while
ETOA does the opposite. There is more to come.
0 IUG0177: ACCTMON - AN ACCOUNTING MONITOR
Category: UTIL Language: CAL MACRO/32 R-00 03/03/88
ACCTMON is an accounting monitor which operates by comparing
differences in the accounting information for tasks and discs over a
specified time period. It is oriented towards a periodically
refreshing display on an OWL terminal. ACCTMONR is a functional
variation whose output is intended for a spool file or printer so that
no limitations on the vertical height of display are imposed.
0 IUG0178: FASTLINK - A HIGH SPEED LINKER
Category: UTIL Language: CAL MACRO/32 R-00 03/03/88
FASTLINK is a modification to LINK/32 which reduces by up to 260 times
the I/O from object libraries during the link process. This is
accomplished by preprocessing once the sites object libraries
effectively blocking them by 260. Thus a single I/O will bring in 260
126 byte object records. Unblocked object libraries are recognized
and used correctly, although no speedup will be obtained. Thus
FASTLINK is a functional replacement for LINK/32. Library blocking is
done by SINGLE.CSS whose operation is self explanitory. Blocked
libraries will have a record length of 32,760 with a data block size
of 128 and an index block size of 1.
0 IUG0179: SCHEDULE
Category: UTIL Language: FORTRAN R-03 11/11/91
Allows the user to submit to the command processor commands or CSS's
at a particular time of day.
0 IUG0180: DISPLAY FILES WITH TIMES
Category: UTIL Language: FORTRAN R-00 05/17/88
A Display Files processor which includes the last assigned date.
0 IUG0181: START COMMAND OPTION PROCESSOR FOR FORTRAN
Category: UTIL Language: FORTRAN R-02 04/27/91
Processes format ST, [COMmand/CMD=fd:],[Log=fd:],[List=Con:] making
the appropriate assigments.
0 IUG0182: VCF UTILITY
Category: UTIL Language: FORTRAN R-02 04/27/91
Allows an MTM user to issue commands to the system console and receive
the command output at the user's terminal. Uses the OS/32 command
processor's logging capability to capture and re-route the command
processor's output.
0 IUG0183: REBOOT
Category: OS&L Language: CAL Macro/32 R-01 10/10/88
- INTERCHANGE PROGRAM LIBRARY 2-13
1
0 An E-Task which allows a privileged remote or local user to reboot the
operating system. Optionally the users terminal can assume the role
of the console upon upon reboot. In addition the user can hand modify
locations in the OS before execution begins. Not a tool for novices!
0 IUG0184: STARPACK 2.07
Category: MATH Language: FORTRAN R-00 07/18/88
STARPAC is a portable library of approximately 150 user-callable ANSI
77 FORTRAN subroutines for statistical data analysis. Designed
primarily for time series analysis and for nonlinear least squares
regression, STARPAC also includes subroutines for normal random number
generation, line printer plots, basic statistical analyses and linear
least squares. Emphasis has been placed on facilitating the
interpretation of statistical analyses, and, for this reason,
comprehensive printed reports of auxiliary statistical information,
often in graphical form, are automatically provided to augment the
basic statistical computations performed by each user-callable STARPAC
subroutine. STARPAC thus provides the best features of many
stand-alone statistical software programs within the flexible
environment of a subroutine library.
0 IUG0185: COLLECTED EBCDIC/ASCII CONVERSION ROUTINES
Category: UTIL Language: Various R-01 01/01/84
Subroutines to perform conversions between EBCDIC and ASCII.
0 IUG0186: TO32 - REPLACE CAL COMMON MODE WITH 32 BIT INSTRUCTIONS
Category: UTIL Language: CAL/Macro 32 R-00 08/24/88
Replaces CAL common mode instructions with 32-bit instructions in CAL
and Macro source. Also translates macro library source. Why does
LDAI translate to LA but CLAI translate to CLI. Who cares!
0 IUG0187: PURGACC/IOACT - I/O ACTIVITY STATISTICS
Category: UTIL Language: C R-00 10/21/88
PURGACC is a mechanism for collecting OS/32 accounting statistics from
active tasks on a periodic basis. IOACT is a report generator for i/o
activity statistics gathered in ATF files which can support an
essentially unlimited number of i/o classes.
0 IUG0188: OS/32 STRUCTURES IN C
Category: UTIL Language: C R-00 10/21/88
Miscellaneous headers/modules for OS/32 structures in C.
0 IUG0189: DUMP - INTERACTIVE PANIC DUMP ANALYSER
Category: UTIL Language: MACRO/32 R-02 06/28/91
DUMP is a program that helps you analyze panic dumps from OS/32
systems. You can also use it to look at the current memory on a
running system. DUMP will also work on any contiguous file or
anything which looks like a contiguous file, such as a bare disc.
With DUMP you examine/modify memory or disk files, display systems or
user defined structures, display which tasks are loaded, display
memory utilization, display accounting information, display device
information, display disk information, search memory, disassemble
code, display lu's assigned to a task, toggle between memory and a
disk file, list files, copy panic dump from tape to disk, snap memory
image to disk, display system journal, display APU/IOP information,
display task/system registers, do hex/decimal arithmetic and
conversions, equate memory locations to symbols, read system map, find
system modules, display MTM users, display general information about
system, display system pointer table and there is more. Its use is
- 2-14 INTERCHANGE PROGRAM LIBRARY
1
0 not limited to operating system analysis, it may be used in the
analysis of problems in user tasks as well. Clearly this is a tool
for the experienced user.
0 IUG0190: LJWYSE - LASER PRINTER/TERMINAL UTILITY
Category: UTIL Language: MACRO/32 R-00 03/28/89
Provides a means to send printouts to a laser printer attached to a
terminal. Primarily intended to provide printer service to a remote
site on a modem through the use of the printer port of a WYSE60
terminal with a connected HP LaserJet series II. This is accomplished
by prefixing the listing with the necessary sequences to place the
terminal in transparent print mode, set up the printer by selecting
fonts, page specifications, etc and restoring the terminal to normal
operation after print is completed. The user may readily modify the
program to include the particular sequences required for their
terminal/printer combination.
0 IUG0191: SPL/32 - INPUT/OUTPUT SPOOLER
Category: UTIL Language: PASCAL R-00 07/14/89
CCUR has dropped SPL/32 effective with the release of OS/32 Rev 8.3.
Those who desire advanced spooler capabilities may want to consider
CUSP as an optional extra cost product available from CCUR. The
Interchange Library has been given the complete SPL/32 packages in
order to provide it to those who care to continue to use and self
maintain SPL/32. This package includes source, in PASCAL and
MACRO/32, as well as documentation in TEXT/32 format. SPL/32 is
designed to improve handling of input/output processes to low speed
devices. It provides advanced capabilities for configuring and
dynamically altering the output spooling environment.
0 IUG0192: HERCULES UTILITIES
Category: UTIL Language: FORTRAN/MACRO32 R-00 07/31/89
A collection of utilities from Hercules Incorporated. TUSE/DUSD/DUSE
are routines that estimate how many feet of Backup tape or how many
sectors will be used by a file select list. CSORT is a FORTRAN
implementation of the QUICKSORT algorithm. VERIFx series of programs
are used for comparing files, side by side, binary, hex or ascii.
EXCON exchanges an MTM terminal with the OS console. SNDMSG can be
used from an MTM terminal to send messages to tasks, such as MTM or
SPL. XRF7 makes a cross reference from FORTRAN source. ENEX makes a
cross reference of one or more relocatable binary object files.
BINLIST makes a hex listing of an object file underlining the command
bytes.
0 IUG0193: QCHEK - CHECK TASK QUEUE DEPTH
Category: UTIL Language: MACRO/32 R-00 11/20/89
QCHEK displays the task queue depth for all tasks in the system. If
a number is passed in the start string only those tasks having a queue
depth greater or equal to that number will be displayed.
0 IUG0194: SPOOLER MONITOR
Category: UTIL Language: MACRO/32 R-00 01/17/90
Through the MTM foreground the user may send commands to the OS/32
spooler and receive the output on their MTM terminal.
0 IUG0195: CALENDAR DATE GENERATION ROUTINES
Category: UTIL Language: Fortran & C R-01 04/27/91
Routines used to generate, maintain and convert dates from and to
julian and month/day/year format. The base year is Jan/01/1800.
- INTERCHANGE PROGRAM LIBRARY 2-15
1
0 IUG0196: USER CONTROL FACILITY
Category: UTIL Language: Source not provided R-02 04/27/91
User Control Facility (UCF) is a signon processor running under MTM.
Included are a user file maintenance utility, signon processor,
SYSINIT.CSS files and a 40 page document. Designed to run under OS/32
R08-03 but contains support for R08-02. UCF enables tailoring the
access a user has to devices by user device groups. The users
privileges are tailored to the user rather than to the account.
0 IUG0197: LS FOR OS/32
Category: UTIL Language: C R-03 11/11/91
LS is used to perform a display file based upon multiple file
descriptor masks. The package allows a user to display the filename,
file type, blocking factors, record lengh, file size, time created,
written and last assigned, and the keys in any order or combination
the user desires. Headings may be omitted and the filenames may be
formatted without blanks. OS/32 8.3 is the minimum revision required.
The output may be redirected with the command line redirection symbol
'>'.
0 IUG0198: MACSHORT - SHORTEN MACRO LIBRARY SOURCE
Category: UTIL Language: CAL Macro/32 R-01 07/22/85
Shortens Macro Library source by removing superfluous text. Macro/32
will execute more quickly when using such a library.
0 IUG0199: ANSITAPE - UNPACK ANSI STANDARD LABELED TAPE
Category: UTIL Language: CAL Macro/32 R-06 01/16/87
Unpack ANSI standard labeled tape in formats F (fixed length blocked
records), D (variable length blocked records) and U (nonstandard line
feed terminated records). Currently multi-file single-volume format
is handled.
0 IUG0200: HLAL2 - HIGH LEVEL ASSEMBLER LANGUAGE MACROS
Category: OS&L Language: CAL Macro/32 R-08 02/18/87
The HLAL2 macros provide structured programming similar to high level
languages. In addition to structure statements like IF-ELSE-ENDIF,
LOOP-ENDLOOP, WHILE-ENDWHILE, REPEAT-UNTIL, & CASE-WHEN-ENDCASE,
appropriate service macros are provided for entry and exit of modules.
Module entry and exit provide a means of passing parameters as well as
controlled stacking and unstacking of registers and providing dynamic
storage. Conditional and unconditional exits from labeled enclosing
loops are provided by LEXIT and LEXITIF. A utility program formats
the assembler listing output for easy reading.
0 IUG0201: SEARCH
Category: UTIL Language: MACRO/32 R-01 07/22/91
Searches a set of files selected with display files format, including
wildcard selection, for a specific string producing a report.
0 IUG0202: FREEMEM - REPORT ON FREE SYSTEM SPACE & TASK MEMORY
Category: UTIL Language: MACRO/32 R-00 01/26/90
An E-Task which reports the amount of free system and task memory in
KB and by blocks.
0 IUG0203: IFTASKX - IF TASK EXISTS
Category: UTIL Language: MACRO/32 R-00 01/26/90
An E-Task which determines if a named task is currently loaded.
-
0 2-16 INTERCHANGE PROGRAM LIBRARY
1
0 IUG0204: TSKTRACE
Category: UTIL Language: MACRO/32 R-00 01/26/90
An E-Task which provides a coarse trace function. It samples once a
second to determine which task is executing. After 100 samples a
report is generated.
0 IUG0205: SVC1INT3 - INTERCEPT SVC1'S TO A REAL DEVICE
Category: UTIL Language: MACRO/32 R-00 11/16/90
SVC1INT3 is a CAL/32 program which intercepts SVC1 I/O to a specified
existent real device. The SVC1 block is output to the log file, along
with any data read or written (in a COPY32 Display format). This is
NOT as good as an independant datascope, but for many communication
interface problems it is sufficient.
0 IUG0206: RAMDISK - QUICKLY INITIALIZE RAMDISK WITH DATA
Category: UTIL Language: MACRO/32 R-00 11/16/90
The RAM disk is first initialized with the static files using BACKUP.
The RAM disk is then marked off and using this program an image of the
RAM disk is written to a contiguous file. When the RAM disk is to be
restored this program will read that image to the RAM disk with a
single SVC1 Read (directory, bitmap, data, everything!).
0 IUG0207: DUSEUTIL - ANALYZE DISK PERFORMANCE
Category: UTIL Language: MACRO/32 R-00 11/16/90
DUSEUTIL is used to study the traditional I/O bound or CPU bound
problem of tasks. The accounting data from the OS gives disk reads,
writes, and seeks; but DUSEUTIL attempts to measure (statistically)
the actual disk usage. It is also helpful to display contentions when
there are shared controllers or selches.
0 IUG0208: DIOSREAD - SEARCH FOR AND DISPLAY DIOS DCB'S
Category: UTIL Language: MACRO/32 R-00 11/16/90
DIOSREAD is an E-Task which will look thru the DMT and corresponding
OS/32's DCBs for DIOS (DMA I/O Subsystem) devices. When located each
DIOS's device DCB (not to be confused with OS/32's device DCB) is
written to the pre-assigned logical unit. Interupts are disabled, the
16 halfwords of a DIOS's device DCB are read, interupts are
re-enabled, and the halfwords are formatted and output to log device.
It is necessary to disable interupts to prevent a mis-interpreted DIOS
interupts. Because of timing requirements, interupts must be
re-enabled between each device's reads.
0 IUG0209: ADDRESS - SEARCH FOR ALL RESPONDING DEVICES
Category: UTIL Language: MACRO/32 R-00 11/16/90
ADDRESS is an E-Task which does a sense status to each possible device
address on the system 1-1023 and outputs records of devices which
respond. Useful when making system changes or debugging device
problems.
0 IUG0210: CMONUTIL - C-CALLABLE TRAP HANDLING LIBRARY
Category: UTIL Language: MACRO/32 R-01 02/12/92
A collection of C-Callable routines written in MACRO/32 including a
routine which may be placed between main and code to process a trap
queue item. This routine permits a trap driven monitor task to be
written in C. The collection also includes stack and memory snapshot
routines.
0 IUG0211: DUMPTASK - DO A TASK MEMORY DUMP
Category: UTIL Language: MACRO/32 R-00 01/03/91
- INTERCHANGE PROGRAM LIBRARY 2-17
1
0 DUMPTASK displays task information and impure data to the selected
output device, generally a printer although file or terminal output
may be specified if desired. Task information includes the name of
the program file and its link time, memory allocation, TSW and
register values, and assigned LU information. Task information is
followed by a side-by-side hex/ASCII dump of the impure area assigned
to the task. This dump may be either narrow (80 columns of output, 16
bytes of data, per line) or wide (120 columns of output, 32 bytes of
data, per line). Usually the attributes of the output device
determine the format. Multiple lines of identical content are
compressed in either format.
0 IUG0212: LIMS SELECTIVE DATA SET MAINTENANCE
Category: LIMS Language: Fortran R-00 04/19/91
Essentially identical in function to the standard LIMS data set
maintenance program, this package offers access to selective data sets
on a per user basis as well as offering enhanced performance on range
list processing.
0 IUG0213: OS/32 C ENHANCEMENT LIBRARY
Category: OS&L Language: CAL Macro/32 & C R-01 11/11/91
Enhances C by providing SVC, Task Queue and Intercept functions.
0 IUG0214: MULTI-FILE SEARCH UTILITY
Category: UTIL Language: CAL Macro/32 & Fortran R-00 07/03/91
Searches multiple files (optionally using wild card specificiations)
for all occurances of a string.
0 IUG0215: XYSTATS - STATISTICAL AYALYSIS
Category: UTIL Language: Fortran R-00 02/21/92
Performs general statistics, such as the mean, standard deviation,
relative standard deviation and coefficients of correlation on up to
100 pairs of data. The program has built in help.
0 IUG0216: DUMPCOPY - PANIC DUMP TAPE TO DISC
Category: UTIL Language: MACRO/32 R-00 02/21/92
Reads a panic dump tape, issuing up to 32 proceed reads to keep the
tape streaming, generating a disk file using multi-record I/O to
improve performance.
0 IUG0320: SCIENTIFIC SUBROUTINE PACKAGE
Category: SCIE Language: FORTRAN R-01 04/09/84
A total of 356 subroutines provide a broad base of computational
routines. All routines are accessible by simple FORTRAN calls. All
data is transmitted via the arguments in the call and none cause input
or output directly, resulting in device independent service for the
user.
0 IUG0323: MOTOROLA M6800 CROSS ASSEMBLER
Category: OS&L Language: CAL R-00 02/24/81
This assembler accepts source code for the M6800 in the standard
Motorola format. The operand data identifiers H, O & B are not
permitted, however the leading identifiers $, % and @ are, allowing
compatibility with existing Motorola source programs. Additionally
conditional assembly is supported. A listing and unsorted symbol
table is produced.
0 IUG0338: CSMP - CONTINUOUS SYSTEMS MODELING PROGRAM
Category: UTIL Language: Fortran R-00 01/28/90
- 2-18 INTERCHANGE PROGRAM LIBRARY
1
0 This program is designed for modeling and evaluating the performance
of continuous systems described by time dependent, non-linear
differential equations and/or transfer functions.
0 IUG0344: PSEUDO-RANDOM NUMBER GENERATOR SUBROUTINE PACKAGE
Category: MATH Language: CAL R-00 07/25/75
Package consists of a set of subroutines for sampling from the
uniform, Gaussian and exponential distributions. Mathematical proofs
for algorithms used exist in the mathematical literature.
0 IUG0347: 1130 COMMERCIAL SUBROUTINE PACKAGE
Category: MATH Language: FORTRAN R-00 09/18/75
Subroutines as detailed in the IBM 1130 Commercial Subroutine
Programmers Guide H20-0241-3 plus several commonly used additions and
a SORT/MERGE routine. Most of the routines have corresponding test
programs in an included test file.
0 IUG0348: CANONICAL CORRELATION ANALYSIS
Category: MATH Language: FORTRAN R-00 02/24/81
Designed to provide the facilities to study experimental results
without restrictions of traditional analytic methods. Allows the user
to study the effects of various groupings of variables.
0 IUG0349: NONPARAMETRIC STATISTICAL ANALYSIS
Category: MATH Language: FORTRAN R-00 11/15/75
The facilities provided by this program for analyzing data are those
procedures that involve the use of contingency or cross-classification
frequency tables.
0 IUG0359: SNAPSHOT DUMP
Category: UTIL Language: CAL R-00 01/01/84
Prints Hex and ASCII equivalent data from a starting through an ending
address. Adjacent identical lines are suppressed.
0 IUG0365: BASIC I
Category: OS&L Language: CAL R-00 01/01/84
A BASIC interpreter written as a reentrant package providing multiuser
capability and file handling features.
0 IUG0375: SORT
Category: UTIL Language: CAL R-00 01/01/84
The records are sorted in place without using a work area. The
routine half-divides a given set of records into two halves so that
all the records in the low half are less than those in the high half.
The routine is called repeatedly. When the small half is eleven
records or less it is sorted by pairwise swapping and the previous
half is examined.
0 IUG0378: SNAP
Category: UTIL Language: CAL Macro/32 R-00 01/01/84
Allows the programmer to monitor general registers and storage while
the application is executing.
0 IUG0388: CONTINUOUS MODELING PROGRAM
Category: MATH Language: FORTRAN R-00 01/01/84
An implementation of the IBM 1130 Continuous Modeling Program Version
I.
-
0 INTERCHANGE PROGRAM LIBRARY 2-19
1
0 IUG0390: TAPE BLOCKING/DEBLOCKING SUBROUTINES
Category: UTIL Language: CAL R-00 01/13/82
A series of subroutines intended for use with either COBOL or FORTRAN.
Optional double buffering for improved performance. This is a well
written and documented package.
0 IUG0404: SPEDIT - SUPER EDIT
Category: UTIL Language: CAL MACRO/32 R-05 11/03/85
SPEDIT is an online interactive text editor designed to create and
modify character oriented text stored on any input medium. SPEDIT is
operator directed through a keyboard device. A version using VTM/32
is provided permitting the user to edit files as large as 4 MB while
loaded in a task space of about 200 KB.
0 IUG0413: P4 PASCAL SYSTEM
Category: OS&L Language: Pascal & CAL R-03 02/24/81
The P4 Pascal compiler, written in Pascal, was designed to be
independent of any existing machine. The compiler translates Pascal
source programs into P4 assembly language. This is subsequently
assembled by an assembler written in CAL and executed by an emulator.
0 IUG0424: ATE
Category: UTIL Language: CAL R-00 01/01/84
The Algorithmic Text Editor is a text editing interpreter developed to
provide an open-ended approach to text editing. Designed to be easy
to use for manually controlled editing, ATE will also run under
control of preprogrammed input strings. One application that has
proven most useful is extending CSS capability. The users manual,
provided on tape, contains several such CSS examples as well as
general information and tutorial examples.
0 IUG0425: COSY1632
Category: UTIL Language: CAL R-00 01/01/84
ASCII data compression and expansion programs provide about 3 to 1
compression on common program text.
0 IUG0426: PARTIAL VOLUME PROTECTION
Category: UTIL Language: CAL R-00 01/01/84
Partial Volume Protection scheme allows an area of a single MSM volume
to be write-protected while the remainder of the volume may be written
to.
0 IUG0428: FORTRAN V LEVEL I COMPILER AND RUN TIME LIBRARY
Category: OS&L Language: CAL R-00 02/09/81
FORTRAN V 16 & 32-Bit compiler in source. 32-Bit source for the Run
Time Library plus 30 test programs and a description of the package on
magnetic media. There are no manuals available.
0 IUG0443: SUBFILER
Category: UTIL Language: CAL R-00 01/01/84
A filing system which packages many files onto one file with a
systematic retrieval method.
0 IUG0444: PPI DRIVER
Category: OS&L Language: CAL Macro/32 R-00 01/01/84
Processor to Processor interface driver.
0 IUG0446: USEFUL COBOL CALLABLE SUBROUTINES
Category: UTIL Language: COBOL, CAL Macro/32 R-04 09/21/87
- 2-20 INTERCHANGE PROGRAM LIBRARY
1
0 COBOL subprograms which provide fast sequential read/rewrite access to
contiguous files with automatic blocking to 64, 128 and 256 byte
records. To edit numeric strings in connection with the ACCEPT
statement. To pass start parameters to a COBOL program. To provide
cyclic wakeup to a COBOL program. To expand two letter state
abbreviations. To assign and deassign files and devices from within
a COBOL program. To do cursor placement, image reads and writes to
CRT. To to ASCII to EBCDIC and EBCDIC to ASCII conversion of a
buffer.
0 IUG0447: OPERATING SYSTEM MONITOR - SYSMON83
Category: UTIL Language: CAL Macro/32 R-08 12/30/90
Continuous graphic display of system activity on a CRT. Currently
supporting OS32/MT Rev 7.2, 8.1, 8.2 and 8.3. A new enhancement makes
the ZOOM automatic, periodically adjusting itself to make use of the
full screen as tasks come and go.
0 IUG0455: BATCH
Category: UTIL Language: CAL, COBOL R-01 01/01/84
Allows an MTM user to create and submit batch jobs with a single
command.
0 IUG0458: COMMENT
Category: UTIL Language: FORTRAN R-00 06/30/81
Aids in commenting Assembly or FORTRAN programs.
0 IUG0460: DISPACK UTILITY
Category: UTIL Language: FORTRAN, CAL R-01 11/19/84
Packs free space on disc into a single contiguous area requiring
neither tape nor a second disc.
0 IUG0463: MTMUSERS
Category: UTIL Language: CAL Macro/32 R-03 02/21/92
Allows the privileged MTM user to display the current MTM users, the
program they are running, their priority, account numbers, privileges,
etc.
0 IUG0468: TEXT
Category: UTIL Language: FORTRAN R-00 01/01/84
Diablo 1620 right justification printing.
0 IUG0469: STUDRAW
Category: UTIL Language: FORTRAN R-00 06/30/81
Display OS/32 System Structures graphically.
0 IUG0470: OSVER
Category: UTIL Language: CAL Macro/32 R-00 01/01/84
Log OS/32 Version. OK, who loaded the wrong OS?
0 IUG0477: CALENDAR GENERATOR
Category: UTIL Language: FORTRAN R-02 10/20/88
Prints either a single page or a 12 page calendar, the later with
optional holidays. Very nice format.
0 IUG0478: VERSATEC V-07 PLOTTING SOFTWARE INTERFACE
Category: UTIL Language: FORTRAN VII R-02 02/26/82
A general batch plot program interface for Versatec V-07 plotting
software.
-
INTERCHANGE PROGRAM LIBRARY 2-21
1
0 IUG0479: DATA BASE SYSTEM FOR INDEXING RESEARCH PAPERS
Category: UTIL Language: FORTRAN R-00 03/01/82
This system permits users to index, edit, classify and retrieve
scientific research paper citations. The system uses an indexed
directory look-up file structure. Reports and statistical summaries
are produced based on criteria selected by the user.
0 IUG0481: FINDPARM - ISOLATE COMMAND LINE ARGUMENTS
Category: OS&L Language: CAL Macro/32 R-04 01/08/87
A macro used in the processing of a start string. Upon each
invocation it returns the ordinal position, and starting address and
ending address of each parameter. Skips leading and disregards
trailing blanks. A test program is included permitting the user to
gain an understanding of the macro.
0 IUG0482: TIDY - FORTRAN CLEANUP ROUTINE
Category: UTIL Language: FORTRAN R-00 05/25/82
TIDY is a program that edits and improves the readability of FORTRAN
source code.
0 IUG0483: SYSERR
Category: UTIL Language: FORTRAN R-05 05/17/88
Takes the 2 status bytes of the SVC 1 parm block used in the FORTRAN
RTL and returns an error code to be used with a computed go to. If
the error status is not recognized the device dependent status is
returned as a -1.
0 IUG0484: SCREEN
Category: UTIL Language: FORTRAN R-05 05/17/88
Allows a program to move the cursor on the CCUR 550 VDU to any
location. All the programmable features of the 550 are supported.
0 IUG0487: TASKDUMP
Category: UTIL Language: CAL R-00 07/20/82
An E-Task used to dump out structures associated with tasks, pure
segments and other items that are displayed on a 'Display Map'
command.
0 IUG0488: DOCUMENT
Category: UTIL Language: FORTRAN, CAL R-00 07/20/82
Used to extract documentation from source code such as CAL or FORTRAN
producing a document with table of contents and index. Particularly
useful when a user subroutine library catalog is required.
0 IUG0490: USEFUL FORTRAN CALLABLE SUBROUTINES AND RELATED PROGRAMS
Category: OS&L Language: FORTRAN R-05 05/17/88
Parsers..A collection of string manipulation routines, Move..Move
characters based on addresses, Getadr & Getf7ctr..Get the address of
arguments. Osscan..To execute a SVC 2 Code 17, Compdir..Insert
compiler directives into a source program, Stparms..move start
parameters to a common block. Mnenbld..Produces FORTRAN data
statements that contain a SVC 2 Code 17 scannable table.
Extfd..Extracts a file name from a buffer and checks for proper
format.
0 IUG0491: DMPTYP - AN AID TO ANALYZING OS/32MT SYSTEM DUMPS
Category: UTIL Language: FORTRAN & CAL Macro/32 R-01 09/15/83
DMPTYP R01-01 is a program (written mostly in FORTRAN ) which permits
the interactive examination of System Dump files by an analyst at a
- 2-22 INTERCHANGE PROGRAM LIBRARY
1
0 terminal. It permits the calling of command files such as "SPTINIT.".
The file "SPTINIT." is included as an example of DMPTYP's
programmability. It also contains a Hex calculator which is capable
of accessing the current System Dump file's memory locations for
computations. This is demonstrated by the DMPTYP command file
"SPTINIT.".
0 IUG0492: DATE FILE SYSTEM
Category: UTIL Language: COBOL R-00 09/30/82
This system has as its backbone a three year date file where date
records point to previous and next working days. This data base
allows ratcheting forward or backward using time intervals to
calculate estimated completion or starting dates.
0 IUG0493: NCAR GRAPHICS SYSTEM, ADAPTED FOR CCUR SYSTEMS
Category: SCIE Language: FORTRAN R-01 08/30/82
A graphics package tailored to your CCUR computer. Easy to use, with
high level calls to do contour plots, X vs Y plots in many formats,
surface displays, world continent maps, maps of the U.S.A. Supporting
a variety of different plotting devices. Including fancy text writing
and 3-dimensional plotting. With full source code.
0 IUG0495: DISC DIRECTORY AUDIT UTILITY
Category: UTIL Language: FORTRAN R-01 10/27/82
Performs an audit of files on a disc, classifying them by account
number, size, age and file extension. Produces a summary report which
allows any user or the system manager to assess disc usage. Disc hogs
are quickly revealed.
0 IUG0496: RTMAIN - REAL TIME EVENT CONTROL NUCLEUS
Category: UTIL Language: CAL Macro/32 R-00 12/17/82
RTMAIN is a versatile CAL main-line program that can be used as the
event control nucleus for many real-time applications. Used at
Perkin-Elmer's Optical Group in Danbury CT for a wide variety of
applications requiring process control or other similar event driven
systems. RTMAIN will interface with FORTRAN programs.
0 IUG0499: TESTVOLS - ARE VOLUMES IN START STRING ON LINE?
Category: UTIL Language: CAL Macro/32 R-04 08/12/85
In an application environment which is brought up by a CSS it is often
critical that specific disc volumes are on line. This program can
guarantee this by checking if all volume names passed in the start
string are in fact on line. If any volumes named are not on line the
task reports the error and goes to end with a non-zero return code.
Errors reported are 'No start parms', 'Missing parm', 'Parm too long',
'Syntax Error', or 'Volume off line'.
0 IUG0501: SACRAMENTO PEAK OBSERVATORY SUBROUTINE LIBRARY
Category: SCIE Language: CAL Macro/32 & FORTRAN R-03 03/19/85
45 subroutines making up a Math, RTL and User library to supplement
the CCUR FORTRAN libraries. From SVC 2 and SVC 7 interfaces to
Fourier Transforms. Includes a how to manual prepared by experienced
users describing hardware, operating system software, utilities to
smooth the way for beginning or infrequent CCUR users. This may serve
as a guide for the operations manual you were planning to prepare some
day soon.
0 IUG0502: ACTTAB - SUMMARIZES DISK OCCUPANCY BY ACCOUNT
Category: UTIL Language: CAL Macro/32 R-04 04/08/85
- INTERCHANGE PROGRAM LIBRARY 2-23
1
0 A very useful program which assigns directly to a disk and generates
a listing showing usage of disk space by account number, broken down
by IN, CO, EC and NB file types.
0 IUG0503: FORTRAN CALLABLE SVC LIBRARIES & TELECOMMUNICATIONS SUPPORT
Category: OS&L Language: FORTRAN & CAL R-08 04/27/91
Allows SVC calls 1, 2, 3, 4, 5, 6, 7, 9, 14 and 15 with many
variations from FORTRAN programs.
0 Most data communication applications present a common class of complex
problems. Usually a good degree of operating system support is
required to efficiently implement solutions. OS/32 provides this kind
of support through ITAM, Terminal Managers and SVC 15 Line Drivers.
However the traditional user interface to these facilities, via
assembly language, is rather complex. In the past, real programming
examples were not generally available. This high level language
interface package provides solutions to these difficulties. While
this package supports asynchronous, synchronous and Ethernet
communications under OS/32, it also provides the user with a
comprehensive set of coding examples. Also included is an SVC
Intercept implementation of UDP Datagram Sockets for Ethernet and a
file transfer mechanism for use under OS/32 and Unix systems.
0 IUG0504: MAILBOX - A GENERAL MAIL SYSTEM BASED UPON SVC INTERCEPTS
Category: UTIL Language: CAL Macro/32 R-09 09/17/91
MAILBOX is a system program that provides a generalized, on-line, mail
facility. It dynamically creates an intercept device that appears to
the user as a disc volume. Besides being valuable in its own right,
this is an excellent example of the programming of SVC intercepts.
0 IUG0505: PACK/UNPACK FILE COMPRESSION UTILITIES
Category: UTIL Language: FORTRAN R-01 01/01/84
PACK and UNPACK are two tasks and associated CSS files developed to
allow on-line archival storage of source data and programs in
compressed ASCII format. These utilities provide for quick, easy
access to an archived program or data file while minimizing its disc
storage requirements during periods of low activity.
0 IUG0506: COPYL - OBJECT LIBRARY MAINTENANCE UTILITY
Category: UTIL Language: FORTRAN R-00 01/01/84
Beginning with an object library and a file containing one or more new
object modules this utility will automatically replace modules in the
library with new modules having the same object label, producing an
updated library while retaining the original order of the modules.
Any new modules for which a module of the same name cannot be found in
the original library will be appended to the updated library. A
report is optionally generated. Checksums are verified. More
convenient than LIBLDR.
0 IUG0508: MULTI-FILE DELETE UTILITY
Category: UTIL Language: FORTRAN R-00 01/01/84
Invoked by a CSS to process a list of files produced by the OS/32 or
MTM "Display Files" command. The output is a CSS file containing
REP/DEL commands to delete the selected files. Options are available
to allow the user veto power on a file by file basis if desired, to
skip, delete or ask the user for instructions in the case of protected
files.
-
0 2-24 INTERCHANGE PROGRAM LIBRARY
1
0 IUG0509: MACROS FOR FORTRAN CALLABLE MACROASSEMBLER SUBROUTINES
Category: OS&L Language: CAL Macro/32 R-00 01/01/84
Macros for FORTRAN VII callable subroutines to generate a program
statement for the subroutine, start data area, define save areas, end
data area, generate subroutine entry preamble and exit from routine
restoring registers.
0 IUG0510: SPYR07 - A TERMINAL SPY
Category: UTIL Language: FORTRAN R-01 03/18/86
Tells you what's happening throughout the system. Uses a little known
feature of SVC 2.19 (Peek) to spy on other tasks. Revision R-01 adds
support for ANSI X3.64/VT100 type terminals.
0 IUG0511: ASK - INTERACTIVE CSS SUPPORT
Category: UTIL Language: FORTRAN R-00 01/01/84
FORTRAN program and CSS to allow CSS to ask simple Yes/No questions
and branch on the response.
0 IUG0512: TSCAN - TAPE SCANNER
Category: UTIL Language: FORTRAN R-01 09/14/88
Reads a magnetic tape generating a report of the number of records and
their length file by file.
0 IUG0513: EXPTAB - EXPAND TABS IN FILES
Category: UTIL Language: FORTRAN R-00 01/01/84
Expands an ASCII file which includes imbedded tabs into a formatted
file.
0 IUG0514: STATLOOP - I/O INTERFACE TESTING
Category: UTIL Language: CAL R-00 01/01/84
An E task to perform status loop testing on a half word interface.
0 IUG0515: EXAMPLE DRIVERS FOR SELCH AND NON-SELCH DEVICES
Category: OS&L Language: CAL Macro/32 R-00 01/01/84
Well documented example drivers, for both mux bus devices and EDMA bus
devices.
0 IUG0516: STRUDIAG - DIAGRAMS STRUC'S FROM CAL SOURCE
Category: UTIL Language: CAL Macro/32 & Pascal R-03 07/22/85
Extracts data from structure definitions using the instruction STRUC
and formats it into a structure diagram giving the offset, name, byte
length and comments of each storage space.
0 IUG0518: BITMAP - SCAN BIT MAP & REPORT ON DISC USAGE
Category: UTIL Language: CAL Macro/32 R-03 04/15/85
An E-task which reads the bitmap and reports the number of sectors and
percentages which are allocated and free. The largest contiguous free
space, and number of allocated and free extents as well as the
percentage of fragmentation are reported. Executes up to 18 times
faster than the original BITMAP.
0 IUG0519: DP - DISC PATCH
Category: UTIL Language: CAL Macro/32 R-03 11/10/87
DISC PATCH (DP) is a completely new replacement for DISCUPD, with much
enhanced utility. Its commands have been modeled after Edit/32 and
Copy/32 to quickly allow the user to become familiar with its use. DP
commands include Chain, which outputs the primary directory to the
list device. Directory, which will decode a requested directory
entry. Display, which displayes a user specified range of sectors.
- INTERCHANGE PROGRAM LIBRARY 2-25
1
0 Find, which searches the directory for a user specified fd. Info,
which displayes basic information about the volume. Get and Modify,
which allow the user to edit sectors. Many additional commands are
provided, including on line Help.
0 Along with this power comes risks. DP will allow you to edit sectors
directly, thus you can destroy the disc's structure, or ideally
restore a corrupted disc.
0 IUG0520: LIST - AN INTERACTIVE & BATCH FILE LISTER
Category: UTIL Language: CAL Macro/32 R-00 01/01/84
A convenient program to produce formatted listings of files. The
program obtains the attributes of the output device and produces
listings of the correct page length, with headings. If the output
device is interactive, one page at a time is produced in response to
a prompt.
0 IUG0521: LISTMLB - MACRO LIBRARY FORMATTING LISTER
Category: UTIL Language: CAL Macro/32 R-03 08/19/86
Reads a macro library established by MLU32 and produces a listing of
macro names in alphabetical order followed by the macros themselves
also in alphabetical order, one per page.
0 IUG0523: SOFTWARE TOOLS
Category: UTIL Language: FORTRAN & RATFOR R-03 01/28/90
The SOFTWARE TOOLS package as generated by the Software Tools Users
Group is an extensive collection of portable software which had its
roots in the book SOFTWARE TOOLS by Kernighan and Plauger. This
collection is so extensive that it would be impossible to provide a
detailed description here. A few examples of the tools are:
RATFOR..a preprocessor which translates RATFOR into FORTRAN, AR..an
archive file maintainer, CH..change text patterns, COMM..print lines
common to two files, CMPRESS..compress input files, CRYPT..encrypt and
decrypt standard input, DC..desk calculator, DIFF..isolate differences
between files, EXPAND..uncompress input files, FIELD..manipulate
fields of data, FORMAT..format text, LAM..laminate files,
LEX..generate a lexical analyzer, LISP..a reasonably well-endowed LISP
interpreter, MACRO..general purpose macro processor, MCOL..multicolumn
formatting, ROFF..a text formatter, SPELL..locate spelling errors,
TSORT..topologically sort symbols, XREF..make a cross reference of
symbols, YACC..generate a compiler from a yacc compiler specification.
A spelling dictionary of 42,000 words is included for use by the SPELL
utility. At 1600 BPI this package alone requires 1200 feet of tape.
0 IUG0524: TAPE INVENTORY PROGRAM
Category: UTIL Language: FORTRAN R-02 05/17/88
A program for maintaining an index to a library of tapes.
0 IUG0525: SELECTOR AND COMPARE
Category: UTIL Language: FORTRAN R-00 09/29/83
SELECTOR copies records from an input file or device to an output file
or device with the option of selecting particular fields and records.
It can unblock tapes and convert from EBCDIC to ASCII in the process.
Blanks or other text can be inserted into the output. COMPARE
compares selected fields from two files. All records that do not
match are listed as they exist on both files with the differences
highlighted. Up to 20 fields may be selected to form the compare key.
-
0 2-26 INTERCHANGE PROGRAM LIBRARY
1
0 IUG0530: SETTERM - SET BIOC TERMINAL PARAMETERS
Category: UTIL Language: CAL Macro/32 R-03 08/07/91
A program which permits each user to set terminal parameters
dynamically when using the BIOC driver. Includes on line help
facilities.
0 IUG0531: SPICE2 - A PROGRAM TO SIMULATE SEMICONDUCTOR CIRCUITS
Category: SCIE Language: CAL Macro/32 & FORTRAN R-00 11/14/83
SPICE is a general-purpose circuit simulation program for nonlinear
dc, nonlinear transient, and linear ac analyses. Circuits may contain
resistors, capacitors, inductors, mutual inductors, independent
voltage and current sources, four types of dependent sources,
transmission lines, and the four most common semiconductor devices:
diodes, BJT's, JFET's, and MOSFET's. SPICE has built-in models for
the semiconductor devices, and the user need specify only the
pertinent model parameter values. A 75 page manual is provided on
tape.
0 IUG0532: UNIQEXT - ENUMERATE UNIQUE FILENAME EXTENSIONS
Category: UTIL Language: FORTRAN R-00 01/20/84
A program which reads the disc directory and produces a listing of
filename extensions and the number of occurences of each.
0 IUG0533: COMPRS/EXPAND - IMPROVED FILE COMPRESSION UTILITY
Category: UTIL Language: FORTRAN R-01 05/11/84
Improved file compression and expansion utility compresses text files
such as program source, listings. Optionally will encrypt using a
user provided key, but please don't forget the key!
0 HELP OUR LIBRARY GROW. CONTRIBUTE SOMETHING TODAY!
- =====
E N D
=====
-
-
-
-
-
-
-
-
- INTERCHANGE PROGRAM LIBRARY 2-27
1
0 This page blank
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2-28 INTERCHANGE PROGRAM LIBRARY
1
0 ======================================
INTERCHANGE LIBRARY PROGRAM ORDER FORM
======================================
- NAME_________________________________________PHONE____________________
Note: You must sign agreement below to receive software!
0 ADDRESS_______________________________________________________________
0 _______________________________________________________________
0 _______________________________________________________________
0 _______________________________________________________________
0 DENSITY REQUESTED: 6250____________1600__________
BACKUP FORMAT WILL BE USED
(default is 1600, but 6250 is prefered)
0 LIST OF IUG NUMBERS (digits only) REQUESTED (20 MAXIMUM):
- _________ , _________ , _________ , _________ , _________ ,*
0 _________ , _________ , _________ , _________ , _________ ,*
0 _________ , _________ , _________ , _________ , _________ ,*
0 _________ , _________ , _________ , _________ , _________
- Order must be accompanied by payment of $50.00. The complete library
is available for $175.00 (at 6250) or $250.00 (at 1600).
0 AGREEMENT
0 I request that the INTERCHANGE Library provide the above listed
programs, if available. I understand that such programs are provided
without any warranty whatsoever.
0 MEMBERSHIP ID# (from INTERCHANGE Newsletter mailing label)____________
You must be a member of INTERCHANGE to order programs from the Library
- SIGNED____________________________________________DATE________________
0 SEND INTERCHANGE MEMBERSHIP APPLICATION TO THE ABOVE ADDRESS__________
0 forward to:
INTERCHANGE
1 Technology Way
Westford MA 01886-9918
508-392-2651 FAX-508-392-2368
-
-
0 INTERCHANGE PROGRAM LIBRARY A-1
1
0 ===================================
INTERCHANGE LIBRARY SUBMISSION FORM
===================================
0 Please submit both programs & documentation on magnetic tape to reduce
our photocopy costs. Backup format at 6250 is preferred.
0 PROGRAM TITLE AND CATALOG DESCRIPTION:
-
-
-
-
SUBMITTOR____________________________________PHONE____________________
0 ADDRESS:
-
0 PROGRAM CATEGORY: [ ] OS&L Operating Systems & Languages
[ ] UTIL Utilities
[ ] MATH Mathematics & Statistics
[ ] SCIE Scientific & Engineering
[ ] BUSI Business
[ ] TUTR Tutorial & CAI
[ ] GAME Games and puzzles
[ ] OTHR Other
0 KEYWORDS & PHRASES:
0 SOURCE LANGUAGE:
0 OTHER SOFTWARE REQUIRED:
0 DESCRIPTION OF SYSTEM USED TO DEVELOP SUBMISSION:
0 MATERIAL SUBMITTED:
- SEND TO: INTERCHANGE, 1 Technology Way, Westford MA 01886-9918
0 I, the undersigned, give full permission to INTERCHANGE to reproduce,
publish, and use this submission, and authorize others to do so
without liability. To the best of my knowledge, this submission is
free of proprietary information of any kind.
- SIGNED____________________________________________DATE________________
-
- A-2 INTERCHANGE PROGRAM LIBRARY
1
0 ==================================
INTERCHANGE MEMBERSHIP APPLICATION
==================================
The name supplied below is that of your organizations primary member.
Included in a membership is one primary member and three associate
members. The associate members should be listed on the reverse side
of this application.
- NAME_______________________________________________________
0 ORGANIZATION_______________________________________________________
0 ADDRESS_______________________________________________________
0 _______________________________________________________
0 CITY_______________________________________________________
0 STATE__________________________________Zip__________________
0 COUNTRY__________________________________Postal_______________
0 PHONE_______________________________________________________
0 BILLING ADDRESS_______________________________________________________
0 _______________________________________________________
0 _______________________________________________________
0 *** SPECIAL INTEREST ***
0 OS/32________________COMMERCIAL______________REAL TIME_____________
0 UNIX_________________DATA COMM_______________MPS___________________
0 GRAPHICS_____________
- Indicate method of membership dues payment:
0 _____Check/money order enclosed ($125.00)
0 _____Please invoice. purchase order/voucher must accompany the
membership application. Terms - net 30 days.
0 forward to:
INTERCHANGE
1 Technology Way
Westford MA 01886-9918
508-392-2651 FAX-508-392-2368
______________________________________________________________________
for Interchange office use
0 Date joined____________________ MID________________
-
- INTERCHANGE PROGRAM LIBRARY A-3
1
0 =================
ASSOCIATE MEMBERS
=================
0 Included in a membership is one primary member and three associate
members. Associate members receive the newsletter and have the same
privileges as the primary member.
- NAME_______________________________________________________
0 ORGANIZATION_______________________________________________________
0 ADDRESS_______________________________________________________
0 _______________________________________________________
0 CITY_______________________________________________________
0 STATE__________________________________Zip__________________
0 COUNTRY__________________________________Postal_______________
- NAME_______________________________________________________
0 ORGANIZATION_______________________________________________________
0 ADDRESS_______________________________________________________
0 _______________________________________________________
0 CITY_______________________________________________________
0 STATE__________________________________Zip__________________
0 COUNTRY__________________________________Postal_______________
- NAME_______________________________________________________
0 ORGANIZATION_______________________________________________________
0 ADDRESS_______________________________________________________
0 _______________________________________________________
0 CITY_______________________________________________________
0 STATE__________________________________Zip__________________
0 COUNTRY__________________________________Postal_______________
-
-
-
A-4 INTERCHANGE PROGRAM LIBRARY
1