Modified Point with V.1.1f:

1)  The DAO module after spinning down automatically was changed
   for not hanging up.

2)  The incorrect error code was corrected. 15-00H11-00H 


Modified Point with V.1.1g:

1)  Correcting strategy when writing improved writing function.

2)  It can be taken the maximum write speed for the disc that is
   inserted in the drive on Mode Parameter Page 2Ah.

3)  It is corrected contents of the TOC as setting up rightly,
   when it is fixed up as the CD-I of the session type.


Modified Point with V. 1.1h:

1)  The write command sequence was changed to prevent noise when
   it is audio copied by Win On CD.

2)  The disc mounting sequence was changed to quicken the mounting
   time of CD-R discs formatted by DirectCD.

3)  Command program was changed to correctly perform the disc erase.


Modified Point with V. 1.1j:

1)  The servo sequence was changed to prevent the error.

2)  The forwarding sequence of DMA under test writing was changed to
   prevent the error.


Modified Point with V. 1.1k:

1)  Writing strategy was changed and writing quality for CD-R discs of
   Taiwan was improved.

2)  It was corrected to recognize the MP7040A drive unit on the Intel
   82371FB PCI Bus Master Controllers.

3)  The presistant bit defined by CD-ROM standards is supported.


Modified Point with V. 1.20:

1)  The function of CD TEXT is supported. To use the function of CD TEXT,
   Writing Software also should have the function with MP7040A.

2)  Improving reading performance of the CDDA.

3)  Rarely, a drive causes Write Error during test writing.  But the
   writing function is improved to avoid writing error.

4)  If Buffer Underrun occur during writing with DAO, the disc is not
   ejected.  But it is modified to eject disc correctly.


Modified Point with V. 1.30:

1)  It is corrected that compare error is occurred if the disc fixed packet
   write with CD Maker is compared with the original disc.

2)  It is corrected that test write of DAO is not removed on the TAO mode.

3)  It is corrected that the wrong address data is returned on the read CD
   MSF.

4)  The video CD written by TAO is made to play.

5)  It is corrected the drive unit mal-functions after full-formatting by
   Packet CD.


Modified Point with V. 1.40:

1)  It is corrected that the frame does not shift when playing Audio CD
    with 1X.

2)  Audio playing performance to the defective and/or scratched disc is
   improved.

3)  Reading performance to the poor quality and/or non-standard disc is
   improved.

4)  It is corrected that drive can mount and play a disc which was written
    over the capacity.

5)  It is corrected that Catalog and ISRC data are not hex-converted on the
   read CD command.


Modified Point with V. 1.60:

1)Improving reading quality of CD TEXT.
